|
#91633015
$64.99
/kit
In Stock
$65.98
Save $0.99
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit
Comes as a Kit
View Kit Components
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThis front spring perch kit welds to a 3" diameter crossmember tube and works with a 1-3/4" wide leaf spring. The "low ride height" perch kit has an additional 1-1/2" of drop over the "standard height" perch kit.
Includes plain steel U-bolts.
Guides & Documents
| KEY SPECS | |
|---|---|
| MFG. Part # | 91633015 |
| Brand | Speedway Motors |
4.8
21 Reviews
Customers appreciate the product for its ease of use, practical functionality, and quality build - particularly for hot rod and rat rod projects. Many have repurchased it for new projects, with the amid process being simple: center, set the angle, and weld. The product is highly rated for its perfect fit onto a 3in round tube and for front suspension, claiming it's impossible to build the part cheaper than its purchase price. The product compatibly allows placement as desired, with only minor welding required to secure it. Consequently, customers favor our product over others for its undeniably superior qualities.
4.8
21 reviews
5
18
4
2
3
1
2
0
1
0
Most Liked Positive Review
5.0
Get Down!
Beats cutting your own
Most Liked Negative Review
3.0
Had to trim for square tube, worked good anyway..
Good stuff
Filter by Ratings
I hope never to have to buy one again but would in a minute
5.0
6 months ago
Gene
Cedar Rapids Iowa
Verified
The front frame perch kit is great . Very nice bends . Craftsmanship is spot on .
Would Recommend
Great mount
5.0
2 years ago
Scott
Surprise AZ
Verified
Perfect spring mount , I cut off the round mount a little bit so I could weld it to a flat crossmember so it made it easy , saves slot of time rather than building your own and it came with the spring u bolts .
Would Recommend
great quality
5.0
2 years ago
bh
el paso Texas
ordered for a spring behind axle kit. great quality. I need to customize mine since I'm not using round tube.
Would Recommend
I would buy this again.
5.0
3 years ago
Lu
Lares,PR
Verified
Speedway make it easy for you to build your hot rod or rat rod with this part.
Would Recommend
Fit great
5.0
4 years ago
Don
Lubbock
Verified
Worked well for it's intended purpose
Would Recommend
I would buy again
4.0
5 years ago
guilld
white house tn
Verified
New project
Would Recommend
Looks great.
5.0
6 years ago
Rob
Hillsboro Il.
Verified
Well made.
Would Recommend
Low Ride
5.0
7 years ago
Cml
Santa Clarita ca
Verified
Mounting in a Willy's suicide spring behind set up
Would Recommend
Going Suicide? This is it...
5.0
7 years ago
Peltonen the swed
Vankiva Sweden
Verified
This is one of the best way to easy install a Suicide axle. Weld it into a round 3" steel member. Fits a traditional transverse spring or a mono Leaf. This is HOT ROD
Would Recommend
nice and clean just weld on and go
5.0
7 years ago
dpc
ohio
Verified
great priced nice part
Would Recommend
Showing 10 of 21 reviews
5 Questions • 5 Answers
I just bought this low ride kit I know when welded to the frame it can be at 5 dergrees but is that on the full weight of the car or then sitting on the frame thanks
by rich
• 10 years ago
1 answer
View Answer
what degree do you have to have this at or should the axle be straight up and down I made my own frame and using a 1930 ford axle and I heard that the axle has to have a 4 degree angle thanks
by scooby
• 11 years ago
1 answer
View Answer
How thick is the steel?
by spareparts22
• 13 years ago
1 answer
View Answer
Hi Guys! Just like to know about how much drop this piece gives as opposed to the standard height piece.I Have 1 of your late 1980's T frames, need to go a bit lower. Thanks Much!
by Artie
• 14 years ago
1 answer
View Answer
Does this product come with the U-Bolts?
by Reds
• 15 years ago
1 answer
View Answer
5 of 5 questions shown
