|
#91045958
$558.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 58.00" Hub-to-Hub Width, 3.00" Tube O.D.
| MFG. Part # | 91045958 |
| Hub-to-Hub Width | 58.00" |
| Flange-to-Flange Width | 53.00" |
| Tube O.D. | 3.00" |
| Hardware Included | No |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyOur economical 100% all new 9" Ford rear axle housing features a new center section, new 3" axle tubes, and new-style Ford ends. Total track width is 58" from hub-to-hub. The Overall housing width is 53". You will need one 29-5/8" long axle and one 27-3/8" long axle. Includes 8 T-bolts for the axle bearing retainer plates and 10 studs for the 3rd member.
The pumpkin is centered in the housing, which puts the pinion offset 1 5/8" from center.
Third member sold separately.
Axle tubes are made from 3/16" wall D.O.M. tubing.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91045958 |
| Brand | Speedway Motors |
| Hub-to-Hub Width | 58.00" |
| Flange-to-Flange Width | 53.00" |
| Tube O.D. | 3.00" |
| Hardware Included | No |
| GENERAL | |
| Sold in Quantity | Each |
| Standard Pinion Location | Offset Pinion / Centered 3rd Member |
4.8
4 Reviews
Customers appreciate the product for its customizable features suitable for setting up new suspensions and drive lines. It is highly practical as you can order it to width and add a third member and axles with ease. Customers have also noted the product's quality, describing it as a good, straight housing and an exact replica, indicating its high material quality that outperforms competitors. Its usability is endorsed due to its aptness in custom chassis work. It is considered safe, and users recommend it for its superior performance.
4.8
4 reviews
5
3
4
1
3
0
2
0
1
0
Filter by Ratings
Cheaper than getting one narrowed...
5.0
a year ago
TL
California
Verified
I had a nine housing g I was going to have narrowed to match early Bronco axles that I had, but the local shop was going to charge $400 to do it. This was delivered to my door in less than a week for only a few dollars more.
Would Recommend
9 inch
4.0
2 years ago
Motrin
Idaho
Verified
Putting in a imca style street stock
Would Recommend
nice rear
5.0
3 years ago
Jim H
Sussex WI
Verified
use for setting up new suspension and drive lines in custom chassis work . order to width and add a third member & axles ( speedway cut to length work great ).
Would Recommend
Good straight housing
5.0
4 years ago
Fordman
Ky
Verified
Exact replica works great
Would Recommend
Showing 4 of 4 reviews
Be the first to ask a question.
