|
#91048361
$76.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Ford 9 Inch, Grand National, Aluminum, Anodized
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThis forged aluminum pinion support is far superior to the original cast iron model. This pinion support uses a standard Ford 9" front pinion bearing and the Daytona style pinion bearing on the rear.
Bearings and races sold seperately.
Timken bearing and race numbers (for reference only):
Fits "Daytona" pinion bearings.
Special pinion nut # 919-6885 is recommended to use in conjunction with this item.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91048361 |
| Brand | Speedway Motors |
| GENERAL | |
| Material Type | Aluminum |
| Finish | Anodized |
| Sold in Quantity | Each |
| Notes | Speedway kit #910-4839 will provide front race, front bearing, rear race, rear bearing, and pinion seal to work with this pinion support. |
4.8
10 Reviews
Customers appreciate the product for its perfect fit, excellent quality, and good-looking design. The product is highly appreciated for its material durability with aluminum being lauded for its precise machining. Reviewers often re-purchase the product, validating its practicality, and usefulness for 9" Ford carrier builds. Users applaud the easy installation process, specifically when the aluminum is heated and the bearing races are cooled. Buyers also commend how effortlessly they can slide in the races. Some customers highlighted the need for light polishing for an easier race press-in. Users recommend more anodizing color options. The product was consistently noted as a superior quality part and a great addition to any applicable setup due to its strength and performance. No direct comparison to competitors is made.
4.8
10 reviews
5
8
4
2
3
0
2
0
1
0
Filter by Ratings
I would buy these shocks again
5.0
4 years ago
Mike
Sacramento, California
Verified
Fits my aluminum center section perfect and looks great.
Would Recommend
Awesome product
5.0
5 years ago
Jpm
Pennsylvania
Verified
Great looking item.
Would Recommend
great upgrade to 9" ford carrier
5.0
5 years ago
jimbo
cedar,mn.
Verified
bearing races fit great with the aluminum warmed up and the races chilled
Would Recommend
3rd purchase for this item!
5.0
7 years ago
PIerce
Harlem, Georgia
Verified
This is the 3rd pinion support I have purchased for 9" Ford carrier builds. I also purchase the bearing and seal kit for this unit. I heat the bearing support in the oven to 300 degrees F and put the bearing races in the freezer and let them get down to 0 degrees. The races will slide all the way in, it takes very little effort to get them in. Excellent part!
Would Recommend
I would by it knowing the bearing seats need polishing.
4.0
9 years ago
Cat man.
So Cal.
Verified
External dimensions were great. I did have to open up the bearing race seats as they would not initially press in. After a light polishing, the races pressed in with no problem. Everything else was fine.
Good quality great service cheers
5.0
9 years ago
Paul
Australia
Verified
Very happy with the product
Would Recommend
nice piece
4.0
10 years ago
burn um off
canton ga
Verified
as described
Would Recommend
Precsion part, fit alumnim center section great
5.0
10 years ago
Gearman
Overgaard,AZ.
Verified
would like to see more aluminum anodizing colors including clear.Superb machining.
Would Recommend
Looks trick and is strong
5.0
14 years ago
Little River Dave H.
Cedar Park, TX
Verified
Excellent quality product. Is a great performance additon to my 9". The install kit is top notch and the black anodize looks trick.
Would Recommend
A good quality Part
5.0
15 years ago
Chuck
Thailand
Verified
A good quality part
Would Recommend
Showing 10 of 10 reviews
2 Questions • 2 Answers
DOES THIS FIT 28 Spline third members?
by
• 14 years ago
1 answer
View Answer
Does this support fit the standard non-nodular ford 9" carrier?
by
• 15 years ago
1 answer
View Answer
2 of 2 questions shown
1966-1986 Ford Bronco
1957-1959 Ford Club
1962-1967 Ford Club Wagon
1957-1974 Ford Country Sedan
1957-1974 Ford Country Squire
1957-1960 Ford Courier Sedan Delivery
1957-1972 Ford Custom
1957-1960 Ford Custom 300
1964-1977 Ford Custom 500
1957-1958 Ford Del Rio Wagon
1968-1983 Ford E-100 Econoline
1975-1983 Ford E-100 Econoline Club Wagon
1975-1987 Ford E-150 Econoline
1975-1987 Ford E-150 Econoline Club Wagon
1968-1974 Ford E-200 Econoline
1963-1967 Ford Econoline
1953-1983 Ford F-100
1975-1986 Ford F-150
1948-1952 Ford F1
1957-1970 Ford Fairlane
1959-1967 Ford Galaxie
1962-1974 Ford Galaxie 500
1972-1976 Ford Gran Torino
1975-1980 Ford Granada
1965-1978 Ford LTD
1977-1979 Ford LTD II
1965-1973 Ford Mustang
1957-1974 Ford Ranch Wagon
1957-1979 Ford Ranchero
1957-1959 Ford Skyliner
1957-1960 Ford Sunliner
1957-1979 Ford Thunderbird
1968-1976 Ford Torino
1957-1960 Ford Victoria
1977-1980 Lincoln Versailles
1967 Mercury Brougham
1964-1967 Mercury Caliente
1957-1974 Mercury Colony Park
1966-1969 Mercury Comet
1957-1968 Mercury Commuter
1967-1979 Mercury Cougar
1959-1963 Mercury Country Cruiser
1966-1971 Mercury Cyclone
1975-1978 Mercury Grand Marquis
1963-1970 Mercury Marauder
1967-1978 Mercury Marquis
1961-1963 Mercury Meteor
1975-1980 Mercury Monarch
1957-1968 Mercury Montclair
1968-1976 Mercury Montego
1957-1974 Mercury Monterey
1958-1968 Mercury Park Lane
1966-1967 Mercury Villager
