|
#91073036
Flexible Radiator Hose Kit, 36 Inch
24 Inch
$116.99
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Key Specs
| MFG. Part # | Select Length and Finish |
| Brand | Speedway Motors |
| Material Type | Stainless Steel |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyDetails
Details
Flexible stainless steel hose will fit all applications. Unique design is non-corrosive and dissipates heat. Choose from chrome aluminum or polished aluminum ends.
Kits includes:
- One 1-3/4" diameter hose
- Two aluminum end cap covers
- Two rubber coolant hose sleeve adapters, 1-3/4" I.D.
- Two 1-1/4" I.D. rubber reducers
- Two 1-1/2" I.D. rubber reducers
- Four hose clamps
Specifications
Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | Select Length and Finish to see |
| Brand | Speedway Motors |
| Material Type | Stainless Steel |
| GENERAL | |
| Hose Length | 36" |
| Hose ID | 1.25" |
| Hose OD | 1.63" |
| Hardware Included | Yes |
| Finish | Select Length and Finish to see |
| Sold in Quantity | Each |
| Notes | Includes (2) end cap covers, (2) 1.75" rubber hose sleeve adaptors, (4) rubber reducers (two 1.25" I.D., two 1.50" I.D.), and (4) hose clamps. |
Ratings & Reviews
4.8
12 Reviews
Customers applaud the product's remarkable flexibility and easy installation, which consistently solves unique radiator fitting challenges in vintage and modified vehicles. The hose material, while deemed slightly thin by some, has proven to be sturdy in use. Its potential to smartly route around car parts like alternators and A/C compressors is frequently noted, positioning it as an optimal choice over rubber hoses, which many suggest causes kinking and coolant flow restriction. Several customers have highlighted the aesthetic appeal of our product, stating its ability to dress up the engine compartment. The product is considered excellent quality, efficient, and a superior solution over competitor offerings.
Ratings & Reviews
4.8
12 Reviews
Customers applaud the product's remarkable flexibility and easy installation, which consistently solves unique radiator fitting challenges in vintage and modified vehicles. The hose material, while deemed slightly thin by some, has proven to be sturdy in use. Its potential to smartly route around car parts like alternators and A/C compressors is frequently noted, positioning it as an optimal choice over rubber hoses, which many suggest causes kinking and coolant flow restriction. Several customers have highlighted the aesthetic appeal of our product, stating its ability to dress up the engine compartment. The product is considered excellent quality, efficient, and a superior solution over competitor offerings.
4.8
12 reviews
5
10
4
2
3
0
2
0
1
0
Filter by Ratings
I would definitely buy this item again
5.0
2 years ago
Digger
Fallston MD
Verified
Really added to the look of the engine compartment !
Would Recommend
I will probably buy this again
4.0
2 years ago
Mr C
Chippewa Falls Wi
Verified
Good fit good finish
Would Recommend
The Flexable hose and clamps worked great. Than you !
5.0
2 years ago
Mr Hot Rod !
Chicago IL
Verified
I ordered the hose for my dad for his 1923 Ford T Roadster. The hose worked out great. To bad we had to cut and bend to make it fit. But I it looks great on the car.
Would Recommend
When You Cant Find A Stock Hose To Fit This Works
5.0
5 years ago
Joe
Michigan
Verified
I bought this because there was no regular hose available for my project and didnt want to change radiator to be able to use a shorter hose. Seems to be working fine, though the hose material is a little thin, not sure how it will last. I would suggest some sort of bracket to support hose, I will be looking into it myself.
Would Recommend
Nice product.
5.0
6 years ago
Don
Englewood. Fl
Verified
Very easy to use. Looks like it should be there. Quality is great..
Would Recommend
Great product
4.0
6 years ago
Toy Box Creations
Amarillo TX
Verified
Going in a 35 Buick, working good
Would Recommend
These solved my problem.
5.0
8 years ago
Dale
Naples, FL
Verified
I have a 1940 Ford pickup with a flathead and A/C. I needed to route the upper radiator hoses around the alternator and A/C compressor. These flexible hoses did the trick. Thanks Speedway.
Would Recommend
this kit has excelent ability to bend in a very short radis
5.0
9 years ago
DR.BILL
Woodland CA.
Verified
used to mount new radiator in 1947 ford with ls1 engine worked great.
Would Recommend
Buyqualitycryonce, buy cheap cry for ever and I'm not crying
5.0
11 years ago
Fort
Ossining, New York
Verified
I am the owner of a classic MGs and I am always looking for ways to lower the temperature of it's little four cylinder. I used this product to create the bottom radiator hose when I eliminated the bypass. It provided a simple solution to an otherwise difficult problem. Prior to using this product I attempted to apply an assortment of preformed rubber hoses that only kinked and restricted coolant flow.
Would Recommend
Worked perfectly and easy to use.
5.0
12 years ago
Craig1946
Omaha, NE, USA
Verified
Dressed up my 462 cubic inch Pontiac engine at a relatively low price. A great decision on my part to purchase this item. Ordered on Sunday and delivered to my home on Monday. GREAT service!
Would Recommend
Showing 10 of 12 reviews
Questions & Answers
Questions & Answers
6 Questions • 7 Answers
I am looking for a radiator hose for a griffin aluminum radiator going on a 66 chevelle SS 396 big block. Is this the one for me ? I assume I would need 2.
by Brian
• 9 years ago
2 answers
View Answers
Can this fit or be adapted to the 1949-1953 Falthead angled water neck?
by Brian
• 10 years ago
1 answer
View Answer
Will the hose end fit on a 1.9 inch outlet? I'm trying to adapt a Truck LS1 Style 6.0 with a Duramax radiator. The pump has 1.25 and 1.5 outlet/inlets and the Duramax radiator has 1.9" outlet/inlets. thanks!
by Ken
• 10 years ago
1 answer
View Answer
What is the minimum bend radius? want to make sure this can be used in my application. need to know what the minimum radius the tubing can withstand. Also, need to know if it's a bend once and done or if it can withstand being manipulated indefinitely.
by Julian
• 11 years ago
1 answer
View Answer
can you buy just the ends?? I can get both hoses out of a 36 inch kit on my 29 model A Pro St but I need to know if I can buy just the ends?? I'm not having any luck finding them
by jsc214
• 11 years ago
1 answer
View Answer
can these hoses be cut to fit. On my T-Bucket 12" would be fine at the bottom but to short at the top and 24" would be to long
by millertime
• 15 years ago
1 answer
View Answer
6 of 6 questions shown