Product Summary

  • Designed for use with the rods included in the Scat rotating assembly
  • They are precision built to the high standards demanded by today's rodders and restorers
  • Available in standard, .001, or .010 inch oversize to better suit your needs
See more details

Key Specs

MFG. Part #
BrandClevite
See more specs

Need To Know

Quick and Easy Returns

Return Policy

Details

Speedway Motors has all the parts you need to rebuild your Flathead Ford V8, including these high quality replacement rod bearings. Precision built to the high standards demanded by today's rodders and restorers, these bearings are available specially for the rods included in our Scat rotating assemblies in standard size, .001, or .010 inch oversize.

CARB Warning

For race/ off road use or for use on pre-1966 vehicles.

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway, or if installed in vehicles model-year 1965 or older; motorcycles model-year 1977 or older; or off-highway recreational vehicles (such as off-road motorcycles and all-terrain vehicles) model-year 1996 and older. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

Specifications

KEY SPECS
MFG. Part #
BrandClevite

Ratings & Reviews

5

1 Review

5

1 reviews

5

1

4

0

3

0

2

0

1

0

Filter by Ratings

i would buy these products again.

5.0

5 years ago

buster

atlanta mi

Verified

i ordered the dist. and the bushing .which i did't need. the person i talked to didn't know for sure. but i opened it up.and possibly can't return it. but i always had good luck with every thing so far. thank you george.

Would Recommend

Showing 1 of 1 reviews

Questions & Answers

3 Questions • 3 Answers

Will these fit the scat rods for 2" journals?

by Fred

• 6 years ago

1 answer

i need 6 pair .001 and 2 pair 010 rod bearings fora 1951 1ba 239 100hp with stock crank do you have ? the engine casting on rear of bloke and on main bearing caps show this to be a iba only made 1 year I according to motors manual dated 1958 every thing seems to be same as 8ba ecsept horse power

by flateworld

• 12 years ago

1 answer

will these bearings fit a stock crank

by flateworld

• 12 years ago

1 answer

3 of 3 questions shown

Customer Impersonation Script