|
#910102
$34.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, .823" Overall Width, Aluminum
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThese bearings have a .757" ID to slip over your 3/4" steering shaft and are in a lightweight aluminum bracket to allow easy installation of your firewall.
From center of bearing to center of mounting hole is 1.456" or approximately 1-1/2". This produces about a 3" mounting circle for the 3 mounting holes.
Guides & Documents
| KEY SPECS | |
|---|---|
| MFG. Part # | 910102 |
| Brand | Speedway Motors |
| GENERAL | |
| Overall Width | .823" |
| Inside Diameter | 0.75" |
| Outside Diameter | 1.630" |
| Centerline of Holes | 2.582" |
| Material Type | Aluminum |
| Sold in Quantity | Each |
| Notes | Max misalignment is 25 deg. Bearing assembly is flat on one side and measures approx 13/16" back to front. |
4.6
28 Reviews
The product received rave reviews for its quality and practicality in mounting steering columns. Customers praised its sturdy construction, smooth rotation, and ease of installation, often mentioning how it effectively resolved their vibration issues. Customers stated it's perfect for varied uses, appreciating its off-centerline alignment ability. Some users claimed it to be superior to similar products due to its quality and functionality. However, some customers pointed out it would have been better if it included mounting hardware and to not mistake it for a bearing. Despite this, the consensus is that the product is high performing, low-cost, and reliable.
4.6
28 reviews
5
23
4
2
3
2
2
0
1
1
Most Liked Positive Review
5.0
A must-have items for fabricators
A must-have when creating or rebuilding a steering column on any race car. Solved all of my vibration problems.
Most Liked Negative Review
1.0
NOT A BEARING
If the bearing did what it should it would be great. This is the second one that I received and both do not work. the center race does not spin like a bearing. It only pivots for the shaft angle. When you turn the steering wheel the shaft rubs on the inner race and wears on the shaft. This is in no way a bearing.
Filter by Ratings
Finished steering column install
5.0
9 months ago
JJ
Kingsford Heights, indiana
Verified
Fit was perfect. Just what I needed to get th job done
Would Recommend
I would buy this again
5.0
2 years ago
Mutt
Kansas City Kansas
Verified
Used it in a rock crawler that has a alum dash has all the support needed
Would Recommend
I recommend and will buy again as needed.
5.0
2 years ago
JK
Booneville MS
Going on the front of the fire wall of a GRT Late model with a 3/4" shaft.
Would Recommend
Great product and company
5.0
2 years ago
Charlie
Anderson SC
Verified
Used in rebuilding race car
Would Recommend
Worked out perfectly
3.0
4 years ago
Racerxtacy
Kyle Texas
Verified
This part worked perfectly to mount my new column to the firewall of my car.
Would Recommend
Great way to mount the other end of steering column
5.0
5 years ago
440 Kris
Lake city
Verified
Sturdy mount
I will buy from you guys again
5.0
5 years ago
Jimbo
Bluefield WV
Verified
This is the best store to buy your parts from
Would Recommend
I would buy this product again. Great value for the price.
5.0
5 years ago
Buster
Troy, MO.
Verified
Building new car for the 2021 season.
Would Recommend
Just what I needed
5.0
6 years ago
Danny
Cincinnati Ohio
Verified
This worked out great. The 30 degree angle was all I needed for a good fit and smooth operation on my firewall.
Would Recommend
This was just what I needed.
5.0
6 years ago
Gdub63
Friendswood Tx.
Verified
This is a good little piece that gets the job done. Off centerline alignment ability is nice.
Would Recommend
Showing 10 of 28 reviews
2 Questions • 3 Answers
if i buy the speedway colapseable steering column 22.5 32 inch can i use this bearing
by snapper
• 13 years ago
1 answer
View Answer
What is the allowable misalignment?
by Jim
• 14 years ago
2 answers
View Answers
2 of 2 questions shown
