|
#52193064
FiTech 93064 Go EFI 2x4 1200 HP EFI System, Black, w/CDI box
$2,347.99
/kit
Factory Shipped
Quantity
Need Help? Call to Order
Add to a list
Share
Select a vehicle to verify Fitment
Select Vehicle
|
#52193064
$2,347.99
/kit
Factory Shipped
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
| MFG. Part # | 93064 |
| Injection Style | Throttle Body |
| Injector Size | 80 lbs./hr. |
| Max Horsepower Rating | 1200 |
| ECM Included | Yes |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThe retrofit fuel injection revolution has begun! FiTech is the leading name in EFI conversions for good reason, bringing not only economy to the market but simplicity through design. The switch to fuel injection has never been easier. FiTech’s technology is designed and developed using OEM level engineering and components. All throttle bodies have built-in computers and sensors, reducing the amount of wiring to route in your vehicle. You can run the system on only 4 wires and two sensors! The sensors are OEM style for proven reliability and easy replacement.
Go EFI 2x4 Power Adder System 1200 HP Injection
FiTech Go EFI Power Adder EFI offers all of the latest technology and tuning software via a simple interface touchscreen. Full control of the ignition system is available, including selectable RPM curves and boost/nitrous retard strategies. The Power Adder units are also laptop tunable and feature data logging capabilities to help you dial in your combo.
The FiTech ECU also controls several vital engine functions including dual adjustable electric fan controls, fuel pump voltage regulation to reduce noise and heat buildup, and an integrated fuel pressure regulator ensures the unit is always at the correct fuel pressure. The wet flow annular discharge design improves fuel atomization, distribution, and intake charge cooling, which is critically important for boosted engines. Go EFI 2x4 is the ultimate in performance for roots style blower setups, even allowing for nitrous tuning.
A list of unique features of the FiTech 30064 Go EFI 2x4 Power Adder Fuel Injection System:
You also get the standard features included in ALL of the FiTech Go EFI systems:
FiTech Go-Spark CD Ignition
FiTech EFI is excited to extend their ignition offerings with the new Go-Spark CD Ignition! The all-new Capacitive Discharge Ignition will deliver high powered sparks from idle to top rpm to improve the combustion event and power output of your engine.
The Go-Spark CDI was designed for both EFI equipped or carbureted engines and features a microprocessor to manage the spark delivery. The ignition, which is assembled in the USA, produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture.
The Go-Spark CDI is designed for 4, 6, and 8-cylinder engines equipped with a distributor. It accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. The tach output signal, which is also used to trigger a FiTech EFI system, is a 12-volt square wave signal that is divorced from other circuits to provide a clean, perfect signal.
Not legal for use on pollution controlled vehicles. This system is designed to be installed into vehicles that do not require emission controls.
Not legal for use on pollution controlled vehicles. This system is designed to be installed into vehicles that do not require emission controls.
Guides & Documents
For race/ off road use or for use on pre-1966 vehicles.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 93064 |
| Brand | FiTech |
| Injection Style | Throttle Body |
| Injector Size | 80 lbs./hr. |
| Max Horsepower Rating | 1200 |
| ECM Included | Yes |
| GENERAL | |
| Carburetor Flange Type | 4-Barrel Square Bore |
| Fuel Injection System Type | Dual 4-Barrel Throttle Bodies (4150 Flange) |
| CFM | 1700 CFM |
| User Tunable | Yes |
| Self Tuning | Yes |
| Injectors Included | Yes |
| Intake Manifold Included | No |
| Metering Style | Speed density |
| EGR | No |
| Throttle Body Included | Yes |
| Throttle Body Material | Cast Aluminum |
| Throttle Body Finish | Satin Black |
| Venturi Quantity | 8 |
| Fuel Pump Included | No |
| Calibration Module Included | Yes |
| Wiring Harness Included | Yes |
| Fuel Pressure Regulator Included | Yes |
| Distributor Included | No |
| MAP Sensor Included | Yes |
| IAC Motor Included | Yes |
| IAT Sensor Included | Yes |
| TPS Sensor Included | Yes |
| Use with Power Adder | Yes |
| Venturi Diameter | 43.00mm |
| GTIN Code | 812061033503 |
| Sold in Quantity | Kit |
| Transmission Controller Included | No |
| Multi-Port Fuel Rails Included | No |
| Timing Control Compatible | Yes |
Be the first to ask a question.