Product Summary

Universal Fit, Throttle Body Injection Style, Polished

    See more details

    Key Specs

    MFG. Part #93001
    BrandFiTech
    Injection StyleThrottle Body
    Max Horsepower Rating600
    ECM IncludedYes
    See more specs

    Need To Know

    Quick and Easy Returns

    Return Policy

    FiTech 93001 Details

    The retrofit fuel injection revolution has begun! FiTech is the leading name in EFI conversions for good reason, bringing not only economy to the market but simplicity through design. The switch to fuel injection has never been easier. FiTech’s technology is designed and developed using OEM level engineering and components. All throttle bodies have built-in computers and sensors, reducing the amount of wiring to route in your vehicle. You can run the system on only 4 wires and two sensors! The sensors are OEM style for proven reliability and easy replacement.

    Go EFI 600 HP Self-Tuning Fuel Injection Kit

    A FiTech ECU lets you regulate your air and fuel mixtures and also controls several vital engine functions as well. It also has an electric fan control, fuel pump voltage regulation to reduce noise and heat buildup, and an integrated fuel pressure regulator ensures the unit is always at the correct fuel pressure without additional expense. The wet flow annular discharge design improves fuel atomization and distribution over traditional 1980s OEM throttle body injection designs.

    Features:

    • Includes (4) high-flow 600 HP fuel injectors
    • Initial setup is quick and easy - simple touch screen selections get you up and running in minutes
    • Self-tuning EFI system - after startup the ECU immediately takes over and provides your vehicle with an optimum tune
    • Basic install can be done with just 4 wires and 2 sensors to install
    • Uses a Bosch 4.2 wideband O2 sensor while all other sensors are easily replaceable GM style parts
    • ECU is mounted on the throttle body so there are NO external boxes or harnesses to clutter up your engine compartment or under the dash, saving you a huge amount of time and keeps things simple and neat
    • Throttle bodies have a completely universal base to fit any 4-bbl manifold
    • Throttle linkage suits most transmissions
    • Choice of three fuel inlet connections
    • All Go-EFI’s feature Voltage Control fuel pump control reduces the voltage to the pump under low load conditions such as idle and cruise thus reducing noise and heat. This will extend the life of your pump and keep the fuel in the tank cooler and your ears from ringing.
    • Go-EFI systems feature wet flow technology and have a unique Swirl Spray Annular discharge design that assures COMPLETE ATOMIZATION! Check out our videos, you need to see it.
    • Ignition timing can be controlled and adjusted on the fly from your touch screen controller
    • Air/fuel ratios can be optimized on the fly as you drive! Try that with your carb.
    • Features 1 adjustable fan control switch
    • Will work with CDI box but not required to control timing
    • Built-in fuel pressure regulator - no extra regulator to mount on your firewall
    • Use of ignition timing control is optional and not required
    • Ignition timing control does not learn and requires synchronizing distributor to engine with a timing light
    • E85 compatible (30% reduction in HP capacity of the fuel system and EFI)

    FiTech Go-Spark CD Ignition

    FiTech EFI is excited to extend their ignition offerings with the new Go-Spark CD Ignition! The all-new Capacitive Discharge Ignition will deliver high powered sparks from idle to top rpm to improve the combustion event and power output of your engine.

    The Go-Spark CDI was designed for both EFI equipped or carbureted engines and features a microprocessor to manage the spark delivery. The ignition, which is assembled in the USA, produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. 

    The Go-Spark CDI is designed for 4, 6, and 8-cylinder engines equipped with a distributor. It accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. The tach output signal, which is also used to trigger a FiTech EFI system, is a 12-volt square wave signal that is divorced from other circuits to provide a clean, perfect signal.

    Not legal for use on pollution controlled vehicles. This system is designed to be installed into vehicles that do not require emission controls.

    Not legal for use on pollution controlled vehicles. This system is designed to be installed into vehicles that do not require emission controls.

    Charts

    Warranty Information

    Click for details

    CARB Warning

    For race/ off road use or for use on pre-1966 vehicles.

    Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway, or if installed in vehicles model-year 1965 or older; motorcycles model-year 1977 or older; or off-highway recreational vehicles (such as off-road motorcycles and all-terrain vehicles) model-year 1996 and older. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

    FiTech 93001 Specifications

    KEY SPECS
    MFG. Part #93001
    BrandFiTech
    Injection StyleThrottle Body
    Max Horsepower Rating600
    ECM IncludedYes
    GENERAL
    Carburetor Flange Type4-Barrel Square Bore
    Fuel Injection System TypeSingle 4-Barrel Throttle Body (4150 Flange)
    User TunableYes
    Self TuningYes
    Injectors IncludedYes
    Intake Manifold IncludedNo
    Metering StyleSpeed density (Map-N) or speed throttle (Alpha-N)
    EGRNo
    Throttle Body IncludedYes
    Throttle Body MaterialCast Aluminum
    Throttle Body FinishPolished
    Venturi Quantity4
    Fuel Pump IncludedYes
    Calibration Module IncludedYes
    Wiring Harness IncludedYes
    Fuel Pressure Regulator IncludedYes
    Distributor IncludedNo
    MAP Sensor IncludedYes
    IAC Motor IncludedYes
    IAT Sensor IncludedYes
    TPS Sensor IncludedYes
    Use with Power AdderNo
    Flow Rating255
    NotesKit includes FiTech Go-Spark CD ignition box.
    GTIN Code812061033381
    Sold in QuantityKit
    Transmission Controller IncludedNo
    Multi-Port Fuel Rails IncludedNo
    Timing Control CompatibleYes

    Questions & Answers

    Customer Impersonation Script