FiTech 36205 Easy Street EFI System with In-Tank Pump, 600 HP

For some, your build is about recreating a fond memory and resurrecting the styles of the past. In most cases, to do just that you have to make some sacrifices along the way. FiTech has once again bridged the gap between modern fuel injection performance with the classic look and stylings of old carburetors.

FiTech Easy Street EFI 600HP System is the perfect solution to bring new life to your build, with just a touch of classic styling. They arrive pre-programmed for an out of the box performance experience and can be set up in a matter of minutes. FiTech Easy Street EFI System features 4 flow matched 80-lb injectors and utilizes Annular Swirl Wet Flow technology for complete fuel atomization. Easy Street series throttle body is finished in that classic carburetor gold and fits on any 4 barrel intake manifold, providing you the best combination of budget-minded, modern fuel injection technology!

When it comes to converting to EFI, it’s important for the fuel pump to be installed in a cool area and what better place than in the gas tank itself. The pump is cooled by the fuel, it’s quieter plus there’s no chance of fuel starvation. To help ease the installation of an in-tank pump, this kit includes a new In-Tank Module assembly.

This universal billet assembly can be used on tanks with a depth of 6” to 15”. The billet aluminum was designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection.

The cut-to-fit bracket secures a 340 LPH pump capable of providing fuel to 600 horsepower engines. To ensure clean fuel is pulled into the pump, two sizes of sock/filters are provided, a standard 11 square-inch design as well as a large, 35 square-inch version.

Features:

• Classic Carburetor Gold Finish.
• Four FiTech 80-lb flow matched injectors.
• Extreme self-learning for wide range super-fast dial in correction.
• Suitable for crate engines and performance engines.
• Pre-programmed with Bolt-N-Go technology for out of the box performance with minimal input required
• Easy tach input, reads tach signal from COIL, HEI, CDI, and many other ignition brands (NO TIMING CONTROL)
• For non-boosted engines-natural aspirated applications ONLY
• Wideband O2 sensor with mounting kit
• Onboard fuel pump driver with PWM
• Annular discharge design
• HandHeld tunning module for performance tunning
• 1 fan control
• E85 compatible (30% reduction in HP capacity of fuel system and EFI)

These fuel injection units are backed by a 1-year manufacturer warranty. Tuning and technical support are available through the phone and online support by the way of tech articles and emails. It's out-of-the-box compatible with everything from a 200 horsepower, small cubic inch factory original motor all the way up to a 600 HP engine build. FiTech Go Street EFI will provide lower idle rpm, cleaner start-up and crisp throttle response - features the best carb tuners in the world can’t match and only come with FiTech technology. Order today to join the golden age of fuel injection!

Handheld Controller Feature Definitions (PDF)

Handheld Controller Quick Start Guide (PDF)

FiTech EFI Nitrous Instructions (PDF)