Edmunds Custom Air Cleaner, Tall, 2-5/8 Inch Neck
Edmunds Custom Air Cleaner, Tall, 2-5/8 Inch Neck
Speedway Motors

|

#91011054

Edmunds Custom Air Cleaner, Tall, 2-5/8 Inch Neck

  • 2 5/8" base fits the common Stromberg 97, Ford 94 or Rochester style carbs
  • Elements included
See More

Type:

Tall

Short

$115.99

/each

In Stock


Quantity

Need Help? Call to Order

Add to a list

Share

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Universal Fit, Solid Top Housing Style, Round Shape

  • 2 5/8" base fits the common Stromberg 97, Ford 94 or Rochester style carbs
  • Elements included
See more details

Key Specs

MFG. Part #91011054
BrandSpeedway Motors
ShapeRound
Overall Diameter4.5"
See more specs

Need To Know

Need help?

855.313.9176
View the Help Center

Quick and Easy Returns

Return Policy

Speedway Motors 91011054 Details

Reproduction of the famous Edmunds air cleaners for your vintage ride. The 2-5/8" base fits the common Stromberg 97, Ford 94 or Rochester 2G style carbs. Air filter included.

Item Details

4-1/2" O.D. x 5-1/2" Tall

CARB Warning

For race/ off road use or for use on pre-1966 vehicles.

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway, or if installed in vehicles model-year 1965 or older; motorcycles model-year 1977 or older; or off-highway recreational vehicles (such as off-road motorcycles and all-terrain vehicles) model-year 1996 and older. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.
CA Prop 65
CARB warning

Speedway Motors 91011054 Specifications

KEY SPECS
MFG. Part #91011054
BrandSpeedway Motors
ShapeRound
Overall Diameter4.5"
GENERAL
Housing StyleSolid Top
Fuel Intake TypeSingle 1-Barrel/2-Barrel
Inlet Diameter (Fraction)2-5/8"
Overall Height5.5"
Inlet Diameter (Decimal)2.625"
Sold in QuantityEach

Ratings & Reviews

4.7

7 Reviews

Overall Assessment

The product is consistently described as "well-made" and "durable," with several customers pleased with its aesthetically pleasing design that adds a vintage touch. Users also commend the product for improving air flow significantly, enhancing engine performance at higher altitudes. Some notes were made regarding slight adjustments for a snugger fit and to prevent unfiltered air intake. However, overall users found it fitting well and functional. Its firm construction, using an aluminum housing, was especially notable. Comparatively, our product is recommended over common options, granting an impressive and cool look. The product is appreciated as practical and effective.

Write A Review

4.7

7 reviews

5

5

4

2

3

0

2

0

1

0

Filter by Ratings

Looks well made

5.0

4 years ago

Humpy

Woodstock GA

Verified

Product as advertised. Looks well made.

Would Recommend

I would definitely purchase this item again!!

5.0

5 years ago

Archie Dunham

Sioux Falls, SD

Verified

Product fit great, I like the product a lot, works Great

Would Recommend

Yes I would but this product again

5.0

5 years ago

Joe

Riner VA

Verified

Make my flathead look even more impressive, and they help the air flow drastically over the little dime store chrome hats that everybody uses.

Would Recommend

yes

4.0

5 years ago

CW Merc

S. Lake Tahoe

Verified

I started with the typical bell air filter for my flathead 2 carb engine. But they choked it out, Granted I live @ 6300 feet and air is thin. I put the twin filter set up on and ran great. product looks good but needs better quality control. one set only had 2 of three mounting screws drilled and taped.

Would Recommend

Very nice piece!

5.0

5 years ago

Robert Flaterås

Norway

Verified

Installed this on my Carter W1 carb. The interface require a adapter. I made my own. Overall the best feature is that vintage look which I was aiming for. The polished faces just brighten up the looks. The ID tapers slightly which is good for that adaptive solution, but not when you want that longer snug fit without wobble. Lock screws are a bit longer than they have to be. If turned all the way in, you will have so much clearance that the filter will suck in un-filtered air. Anyway, I liked the result on my application.

Would Recommend

I would buy this again.

4.0

7 years ago

Shelby

Ontario Canada

Verified

Product looks great and Is very durable with a aluminum housing. Con I had to make a seal to go on the inside to adapt to my particular carb.

Would Recommend

Looks cool on my Model "A"

5.0

8 years ago

TBone

Lake county, CA.

Verified

I have a 1931 Model "A" with an overhead valve conversion. I needed something that could breath better than what had been on the Stromberg 97 in the past. This raskell seems to do just that and looks cool too.

Would Recommend

Showing 7 of 7 reviews

Questions & Answers

3 Questions • 3 Answers

Will the universal fit interfere with the automatic choke on my 47 Hudson with a Carter 510 carburetor ?

by WDB

• 8 years ago

1 answer

View Answer

Are these stamped steel or cast aluminum?

by Dreaaoner

• 12 years ago

1 answer

View Answer

will 3 of these work ona tri power unit with 3 speedy 7 carbs

by ratrodbob

• 12 years ago

1 answer

View Answer

3 of 3 questions shown

Customer Impersonation Script