Menu

Shop

Garage

Cart

Account

Product Summary

318, 360, Carbureted Fuel System Type, Aluminum

  • It is based on the performer RPM-series and comes with a unique air gap
  • The air gap produces a cooler and denser mixture for more power
  • Specifically designed for the 1500 to 6500 RPM range
  • Made from lightweight aluminum with a natural finish
  • Has a 5.160" x 5.625" bolt hole pattern and is 5.27" tall

Key Specs

MFG. Part #7577
BrandEdelbrock
Intake Manifold TypeDual Plane
RPM Range1,500-6,500
Material TypeAluminum

Need To Know

This Product Will Ship Free

Shipping Policies & FAQs

Quick and Easy Returns

Return Policy

Edelbrock 7577 Details

Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Non-EGR. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. Improve performance on the street or race track. For 1992 and later 5.2L and 1993 and later 5.9L Mopar Magnum V8. 4 bbl carbs. Available in cast finish.
  • Based on Performer RPM-Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • Designed For 1500 To 6500 RPM
  • Dual-Plane High-Rise Intake
  • Outstanding Performance

Charts

CARB Warning

Follow EPA, CARB, and state regulations for engine changes

Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine

Edelbrock 7577 Specifications

KEY SPECS
MFG. Part #7577
BrandEdelbrock
Intake Manifold TypeDual Plane
RPM Range1,500-6,500
Material TypeAluminum
GENERAL
Speedway Motors Catalog Part #325-7577
Fuel System TypeCarbureted
Carburetor QuantityOne
Carburetor Flange Type4-Barrel Square Bore
FinishNatural
EGRNo
Intake Section IncludedComplete
Gaskets IncludedNo
Overall Height5.27"
Bolt Hole Pattern5.160" x 5.625"
Sold in QuantityEach
GTIN Code085347075775