Menu

Shop

Garage

Cart

Account

Product Summary

318, 340, 360, Carbureted Fuel System Type, Aluminum

  • Engineered for between 1500to 6500 RPM
  • Features a dual-plane high-rise intake
  • Works with early-style water neck only
  • Specially designed for the Mopar 318,340,360 engines
  • It is based on the popular Performer RPM-Series with unique air gap

Key Specs

MFG. Part #7576
Fuel System TypeCarbureted
Intake Manifold TypeDual Plane
Carburetor QuantityOne
Carburetor Flange Type4-Barrel Square Bore

Need To Know

This Product Will Ship Free

Quick and Easy Returns

Details

Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. Accepts early-style waterneck only.

Non-EGR. Mopar 340-360. 4 bbl carb. For street and high performance use only. Available in cast finish.

  • Based on Performer RPM-Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • Designed For 1500 To 6500 RPM
  • Dual-Plane High-Rise Intake
  • Accepts Early-Style Waterneck

Charts

CARB Warning

Follow EPA, CARB, and state regulations for engine changes

Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine

Specifications

KEY SPECS
MFG. Part #7576
BrandEdelbrock
Fuel System TypeCarbureted
Intake Manifold TypeDual Plane
Carburetor QuantityOne
Carburetor Flange Type4-Barrel Square Bore
GENERAL
RPM Range1,500-6,500
Material TypeAluminum
FinishNatural
EGRNo
Intake Section IncludedComplete
Gaskets IncludedNo
Overall Height5.35"
Bolt Hole Pattern5.160" x 5.625"
Sold in QuantityEach
NotesWill not fit 1992 and later Magnum engines. Will not accept Thermo-Quad. Accepts early-style water neck only. No provision for exhaust-heated chokes. No exhaust crossover.
GTIN Code085347075768