Edelbrock

#32507516

Edelbrock 7516 Performer RPM Air-Gap Vortec SBC Intake Manifold

Made entirely from aluminum
Will work with the 1976 and later alternator and air-conditioning brackets
An external water bypass boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines

Finish:

Black & Chrome Plasma

Color:

Select a color

Starting from

$646.95

/each

In Stock

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Dual Plane Intake Manifold Type, Aluminum

Made entirely from aluminum
Will work with the 1976 and later alternator and air-conditioning brackets
An external water bypass boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines
The unique Air-Gap design separates the hot engine valley from the air/fuel mixture for a cooler, denser charge and more power throughout the rpm range
Available in both Black and Chrome Plasma finish

See more details

Key Specs

MFG. Part #	Select Finish and Color
Brand	Edelbrock
Intake Manifold Type	Dual Plane
Carburetor Flange Type	4-Barrel Square Bore
Material Type	Aluminum

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

Details

Edelbrock RPM Air-Gap intake manifold is based on the powerful Performer RPM Vortec #7116. This single four-barrel intake is designed for 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or Edelbrock E-Tec aluminum heads. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. An external water bypass boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines. Includes rear water outlets, nitrous bosses, a temp sensor boss that clears all waternecks, two distributor clamp locations and a heater outlet boss that's angled for proper fit over the valve cover. Accepts 1976 and later alternator and air-conditioning brackets for street installations. For square-bore carbs. No provision for exhaust-heated chokes and no exhaust crossover. Will not fit under stock Corvette hood.

Made entirely from aluminum with a natural finish
Will work with the 1976 and later alternator and air-conditioning brackets
An external water bypass boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines
The unique Air-Gap design separates the hot engine valley from the air/fuel mixture for a cooler, denser charge and more power throughout the rpm range
Kit includes rear water outlets, nitrous bosses, a temp sensor boss that clears all water necks, two distributor clamp locations and a heater outlet boss that's angled for proper fit over the valve cover
Available in both Black and Chrome Plasma finish

Guides & Documents

Intake Manifolds Installation Instructions (32507516)

CARB Warning

Follow EPA, CARB, and state regulations for engine changes

Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine

CA WARNING:

Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov

CARB warning

Specifications

KEY SPECS
MFG. Part #	Select Finish and Color to see
Brand	Edelbrock
Intake Manifold Type	Dual Plane
Carburetor Flange Type	4-Barrel Square Bore
Material Type	Aluminum

GENERAL
GTIN Code	Select Finish and Color to see

Ratings & Reviews

Be the first to write a review.

Questions & Answers

Be the first to ask a question.