|
#3257182
Edelbrock 7182 Performer RPM Camshaft/Lifter Kit, Ford 351W
$377.95
each
Factory Shipped
This part will be shipped by the manufacturer. We estimate this item will ship on or before April 3rd.
Add to a list
Share
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
351W, Hydraulic Flat Tappet Camshaft Type
See more details
Key Specs
Brand | Edelbrock |
Camshaft Type | Hydraulic Flat Tappet |
See more specs
Need To Know
This Product Will Ship Free
Shipping Policies & FAQsNeed help?
855.313.9176Quick and Easy Returns
Return PolicyDetails
Details
Designed for street high-performance applications, Performer RPM cams provide power from 1500 to 6500 rpm.
- Designed for 1500 to 6500 Performance
- Maximum Power in High-RPM with Good Low-End Torque
- Matched to Edelbrock Performer RPM Intakes
- 10 to 12 in. of Manifold Vacuum at Idle
- More Lift and Duration than Most Street Camshafts
- Includes Hydraulic Lifters and Assembly Lube
- Dyno Matched/Street Proven Performance
- Take The Guesswork Out Of Camshaft Selection
Charts
Guides & Documents
CARB Warning
Follow EPA, CARB, and state regulations for engine changes
CARB Warning
Follow EPA, CARB, and state regulations for engine changes
Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine
Specifications
Specifications
KEY SPECS | |
---|---|
Brand | Edelbrock |
Camshaft Type | Hydraulic Flat Tappet |
GENERAL | |
Intake Duration | 290 |
Exhaust Duration | 300 |
RPM Range | 1,500-6,500 |
Intake Duration (.050" Lift) | 224 |
Exhaust Duration (.050" Lift) | 234 |
GTIN Code | 085347071821 |
Intake Valve Lift w/ Rocker Arm Ratio | 0.496" |
Exhaust Valve Lift w/ Rocker Arm Ratio | 0.52" |
External Ignition Box Required | No |
Valve Spring Required | Yes |
Valve Spring Included | No |
Lifter Type | Hydraulic Flat Tappet |
Lifters Included | Yes |
Retainers Included | No |
Locks Included | No |
Timing Chain and Gears Included | No |
Assembly Lubricant Included | Yes |
Pushrods Included | |
Rocker Arms Included | No |
Sold in Quantity | Kit |
Notes | Although the advertised RPM range for these camshafts is 1,500 to 6,500 rpm, for best performance we recommend a minimum 3,000 rpm stall torque converter be used in applications with automatic transmissions. |