|
#3257107
Edelbrock 7107 RPM Air Gap Intake Manifold, LT1, EFI Multi-Port
- Edelbrock part #7107 RPM Air-Gap LT1 utilizes the proven short runner tunnel-ram style, this manifold provides the next step up in performance for LT1 owners.
- Our patented Air-Gap design delivers a cooler and denser air stream for maximum power output.
- This intake manifold is designed to work with either a 52mm throttle body or 58mm throttle body.
See More
$759.95
each
Factory Shipped
This part will be shipped by the manufacturer. We estimate this item will ship on or before March 29th.
Add to a list
Share
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
350, EFI Fuel System Type, Multi-port Injection Style
- Edelbrock part #7107 RPM Air-Gap LT1 utilizes the proven short runner tunnel-ram style, this manifold provides the next step up in performance for LT1 owners.
- Our patented Air-Gap design delivers a cooler and denser air stream for maximum power output.
- This intake manifold is designed to work with either a 52mm throttle body or 58mm throttle body.
- This manifold also accepts early and late OEM LT1 throttle bodies and fuel rails. #7107 is designed to match #61905/#61919 LT1 cylinder heads.
See more details
Key Specs
MFG. Part # | 7107 |
Brand | Edelbrock |
Material Type | Aluminum |
See more specs
Need To Know
This Product Will Ship Free
Shipping Policies & FAQsNeed help?
855.313.9176Quick and Easy Returns
Return PolicyEdelbrock 7107 Details
Edelbrock 7107 Details
Edelbrock Performer RPM Air Gap Intake Manifold for Small Block LT1 GEN II Chevy Engines
- Edelbrock part #7107 RPM Air-Gap LT1 utilizes the proven short runner tunnel-ram style, this manifold provides the next step up in performance for LT1 owners.
- Our patented Air-Gap design delivers a cooler and denser air stream for maximum power output.
- This intake manifold is designed to work with either a 52mm throttle body or 58mm throttle body.
- This manifold also accepts early and late OEM LT1 throttle bodies and fuel rails. #7107 is designed to match #61905/#61919 LT1 cylinder heads.
Charts
Guides & Documents
CARB Warning
Follow EPA, CARB, and state regulations for engine changes
CARB Warning
Follow EPA, CARB, and state regulations for engine changes
Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine
Edelbrock 7107 Specifications
Edelbrock 7107 Specifications
KEY SPECS | |
---|---|
MFG. Part # | 7107 |
Brand | Edelbrock |
Material Type | Aluminum |
GENERAL | |
Fuel System Type | EFI |
Injection Style | Multi-port |
Carburetor Flange Type | 4-Barrel Square Bore |
RPM Range | 1,500-6,500 |
Finish | Natural |
EGR | Yes |
Intake Section Included | Complete |
Plenum Material | Aluminum |
Plenum Finish | Natural |
Base Finish | Natural |
Base Material | Aluminum |
Throttle Body Included | No |
Injectors Included | No |
Aftermarket Fuel Rail Required | No |
Fuel Rails Included | No |
Gaskets Included | No |
Overall Height | 6" |
Bolt Hole Pattern | 5.160" x 5.625" |
Runners Included | Yes |
Runners Removable | No |
Supplemental Bosses Cast-In | No |
Supplemental Bosses Machined | No |
Sold in Quantity | Each |
Notes | May require minor cylinder head porting on O.E. heads. Please see the "charts and guides" tab for a comparison of square bore vs spread bore. |
GTIN Code | 085347071074 |