Menu

Shop

Garage

Cart

Account

Product Summary

400, 421, 428, 455, EFI Fuel System Type, Aluminum

    Key Specs

    MFG. Part #50565
    BrandEdelbrock
    Material TypeAluminum

    Need To Know

    This Product Will Ship Free

    Shipping Policies & FAQs

    Quick and Easy Returns

    Return Policy

    Edelbrock 50565 Details

    Victor Pontiac EFI is based on the Torker II Pontiac manifold number 5056 designed for 1965-79 street 389-455 c.i.d. Pontiac V8s. Can be used with Ram Air IV heads; will not fit Ram Air V heads. Will not fit 265/301 c.i.d. V8s or under Trans Am Shaker hood.
    • For 2500 to 6500 RPM High-Performance Engines
    • Can Be Use w/Ram Air IV Heads

    Charts

    CARB Warning

    For race/ off road use or for use on pre-1966 vehicles.

    Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway, or if installed in vehicles model-year 1965 or older; motorcycles model-year 1977 or older; or off-highway recreational vehicles (such as off-road motorcycles and all-terrain vehicles) model-year 1996 and older. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

    Edelbrock 50565 Specifications

    KEY SPECS
    MFG. Part #50565
    BrandEdelbrock
    Material TypeAluminum
    GENERAL
    Fuel System TypeEFI
    Injection StyleMulti-port
    Carburetor Flange Type4-Barrel Square Bore
    RPM Range1,500-6,500
    FinishNatural
    EGRNo
    Intake Section IncludedComplete
    Plenum MaterialAluminum
    Plenum FinishNatural
    Throttle Body IncludedNo
    Injectors IncludedNo
    Aftermarket Fuel Rail RequiredYes
    Fuel Rails IncludedNo
    Gaskets IncludedNo
    Overall Height6.59"
    Bolt Hole Pattern5.160" x 5.625"
    Runners IncludedNo
    Runners RemovableNo
    Supplemental Bosses Cast-InNo
    Supplemental Bosses MachinedNo
    Sold in QuantityEach
    NotesWhen installed on 1972 and up cylinder heads, intake gasket FEL-MS90205 or MRG-5848 is required to seal exhaust crossover.
    GTIN Code085347505654