|
#3253713
Edelbrock 3713 Performer 4.3L T.B.I. V6 Intake Manifold, Chevy/GMC
$595.95
/each
Factory Shipped
Quantity
Need Help? Call to Order
Add to a list
Share
Select a vehicle to verify Fitment
Select Vehicle
Key Specs
| MFG. Part # | 3713 |
| Injection Style | Throttle Body |
| Carburetor Flange Type | 4-Barrel Square Bore |
| RPM Range | Idle-5,500 |
| Material Type | Aluminum |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyEdelbrock 3713 Details
Edelbrock 3713 Details
Performer 4.3L T.B.I. V6 Intake Manifold is designed for street 1987-94 Chevrolet 4.3L V6 with factory Throttle Body Injection. The Performer 4.3L intake manifold provides outstanding throttle response and torque increases from idle to 5500 rpm.
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Computer Chip Available - Return Card in Packaging
- Accepts All Factory Accessories
- Not for Vehicles with Flash Memory Computer
- Gains 6/10s of a Second in 10 to 70 MPH
- Stock Throttle Body Remains in Stock Position
Charts
Guides & Documents
CARB Warning
Follow EPA, CARB, and state regulations for engine changes
CARB Warning
Follow EPA, CARB, and state regulations for engine changes
Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine
Edelbrock 3713 Specifications
Edelbrock 3713 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 3713 |
| Brand | Edelbrock |
| Injection Style | Throttle Body |
| Carburetor Flange Type | 4-Barrel Square Bore |
| RPM Range | Idle-5,500 |
| Material Type | Aluminum |
| GENERAL | |
| Fuel System Type | EFI | Carb |
| Finish | Natural |
| EGR | Yes |
| Intake Section Included | Complete |
| Plenum Material | Aluminum |
| Plenum Finish | Natural |
| Throttle Body Included | No |
| Injectors Included | No |
| Aftermarket Fuel Rail Required | No |
| Fuel Rails Included | No |
| Gaskets Included | No |
| Overall Height | 5.15" |
| Bolt Hole Pattern | 5.160" x 5.625" |
| Runners Included | No |
| Runners Removable | No |
| Supplemental Bosses Cast-In | No |
| Supplemental Bosses Machined | No |
| Sold in Quantity | Each |
| Notes | This intake manifold is not compatible on vehicles with flash memory ECM's. |
| GTIN Code | 085347037131 |
Ratings & Reviews
Ratings & Reviews
Questions & Answers
Questions & Answers
1 Question • 1 Answer
Does this fit vortec heads?
by Nicolas
• 3 years ago
1 answer
View Answer
1 of 1 questions shown

