
Edelbrock 35670 Pro-Flo 4 EFI 4150-Style Kit, Gen 2 Hemi 426-572
426 Chrysler Hemi V8, Multi-port Injection Style, User Tunable, Self Tuning, Injectors Included
Details
Info
Pro-Flo 4 Dual-Quad HEMI EFI System #35670 is intended for use with1964-71 Mopar Gen II 426-572 HEMI engines operating in the 2,500-6,500+ RPM range. This EFI incorporates a single-plane Air-Gap design manifold with dual square-bore 4150-style throttle bodies that bolts directly onto vehicles with a shaker hood. The Dual-Quad HEMI EFI manifold is compatible with factory-style cylinder heads but optimized for use with Victor Jr. HEMI heads. Manifold comes preassembled and ready to run with throttle bodies, 60 lb/hr injectors and fuel rails. Also included is a single-connection distributor designed to work specifically with Pro-Flo 4 providing fully sequential-port injection and infinite control over ignition and fuel events under all conditions. This system is rated for 825 horsepower at 43 PSI with all supporting sensors, ECU, wire harnesses and 7-inch Android tablet included for a streamlined installation. Key advancements of Pro-Flo 4 EFI are its Self-Calibrating Fuel Map Technology, Wide-Band O2 Closed Loop Mixture Control, and new low-profile ECU with faster processor and upgraded Bluetooth chip for reliable connectivity with the E-Tuner app that comes preinstalled on the tablet. The E-Tuner includes a Setup Wizard to guide you through setup and provides fuel and spark adjustability for complete control over the system. Pro-Flo 4 EFI does not require laptop tuning. Minimal setup and tuning adjustments are required with base calibrations provided in the software. The ECU is self-learning and will continually adjust the fuel injection calibration to get the maximum performance out of your engine by maintaining a specified target air-fuel ratio as you drive. The E-Tuner provides the ability to fine-tune air-fuel ratios, ignition curve, idle speed, acceleration fuel, fans, rev-limiter and more. Multiple displays let you monitor engine performance in real-time from inside or outside of the vehicle while retaining the simplicity that Pro-Flo 4 systems are known for.
- Edelbrock 35670
- Dual square bore 4150-style throttle bodies
- Mopar Gen II 426-572 Hemi
Notes Includes Android tablet for a wireless Bluetooth connection to the ECU.
Important Messages
- This item ships directly from the manufacturer. It may take an additional 30 business days for Edelbrock to ship this item.
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
- This item ships via Ground Shipping only. Expedited and Air shipping options are not available.
More Like This
-
Edelbrock 357000 Pro-Flo 4 EFI 4150-Style Kit, GM LS, No Tablet
-
Edelbrock 357500 Pro-Flo 4 EFI 4150 Kit, Gen IV LS, No Tablet
-
Edelbrock 357100 Pro-Flo 4 EFI 4150-Style Kit, GM LS, No Tablet
-
Edelbrock 357400 Pro-Flo 4 EFI 4150 Kit, Gen III/IV LS, No Tablet
-
Edelbrock 35740 Pro-Flo 4 EFI 4150-Style Kit, Gen III/IV LS
-
Edelbrock 35710 Pro-Flo 4 EFI Kit, GM LS Gen III/IV Engine
-
Edelbrock 35700 Pro-Flo 4 EFI Kit, GM LS Gen III/IV Engine
-
Edelbrock 357230 Pro-Flo 4 EFI XT Kit, Gen III/IV LS, No Tablet
-
Edelbrock 357300 Pro-Flo EFI XT-Style Kit, Gen III LS, No Tablet
-
Edelbrock 358930 Pro-Flo 4 XT, Gen III/IV LS Rect Port, No Tablet
Reviews
Q & A
-
-
Check out episode 9 of our 410 Sprint Car Build series! Today, the guys are having some fun with the fuel system.
-
Learn how to replace a fuel sending unit. Our fuel gauge sending unit guide and installation video covers all you need to match your fuel sender and gauge.
-
Pat talks about one of our cold air intake kits from AIRAID.
-
Dave gives a few tips on how to select the appropriate intake manifold for your project.
-
Tim talks about the vintage carburetor options we have available.