Product Summary

Chevy Small Block V8, Carbureted Fuel System Type

    Key Specs

    MFG. Part #2901

    Need To Know

    This Product Will Ship Free

    Shipping Policies & FAQs

    Quick and Easy Returns

    Return Policy


    Designed for competition 262-400 c.i. S/B Chevys used in all forms of racing, the Victor Jr. intake manifolds incorporate Edelbrock's extensive knowledge in induction technology. Designed for the 2 bbl racer, providing outstanding performance from 3500 to 7000 RPM. The runners are sized especially for the 2 bbl racing engines for the ultimate combination of torque/horsepower and fuel distribution. 

    An extra tall carburetor pad eliminates the need for spacers, and rear water outlets allow for a 4-corner coolant flowpath if desired. Other features include dual distributor clamp locations and port exits sized to match Chevy cast-iron Bowtie cylinder heads.  Accepts standard restrictor plates and carb adaptors.

    • Extra material added for port matching and customizing
    • Water crossovers drilled and tapped for temp senders/bypass holes
    • Right front has relief for dry sump "pressure in" lines




    • Carburetor Recommendation: Holley #0-4412 (500 cfm)

    CARB Warning

    For race/ off road use only

    Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.


    MFG. Part #2901
    Fuel System TypeCarbureted
    Intake Manifold TypeSingle Plane
    Carburetor QuantityOne
    Carburetor Flange Type2-Barrel 4-Bolt
    RPM Range3,500-7,000
    Material TypeAluminum
    Intake Section IncludedComplete
    Gaskets IncludedNo
    Overall Height5.98"
    Port Height2.04"
    Port Width1.18"
    Bolt Hole Pattern5.125" x 3.500"
    Sold in QuantityEach
    NotesHolley 2-barrel flange
    GTIN Code085347029013