Product Summary

EFI Fuel System Type, Multi-port Injection Style

  • The Victor Jr. Holden is a single-plane design that is tuned for maximum air flow from 3500 to 7500 rpm.
  • Features a taller design with long tapered runners for a broad operating rpm range.
  • Will fit both stock 1988-1998 EFI style cylinder heads and the Edelbrock Holden VN RPM cylinder heads.
  • Also features a 4150 flange for use with square-bore carburetors and throttle bodies.
  • Includes extra material for porters to modify for use with 4500 series applications.
See more details

Key Specs

MFG. Part #28945
Injection StyleMulti-port
Carburetor Flange Type4-Barrel Square Bore
RPM Range3,500-7,500
Material TypeAluminum
See more specs

Need To Know

Quick and Easy Returns

Return Policy

Edelbrock 28945 Details

Edelbrock part #28945 Victor Jr. Holden EFI intake manifold is for use with competition 355+ c.i.d. Holden V8 engines that utilize the 1988-98 Holden VN cylinder heads.

  • The Victor Jr. Holden is a single-plane design that is tuned for maximum air flow from 3500 to 7500 rpm.
  • Features a taller design with long tapered runners for a broad operating rpm range.
  • Will fit both stock 1988-1998 EFI style cylinder heads and the Edelbrock Holden VN RPM cylinder heads.
  • Also features a 4150 flange for use with square-bore carburetors and throttle bodies.
  • Includes extra material for porters to modify for use with 4500 series applications.
  • The water outlet is machined for use with a small-block Chevy waterneck.

CARB Warning

Follow EPA, CARB, and state regulations for engine changes

Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine

Edelbrock 28945 Specifications

KEY SPECS
MFG. Part #28945
BrandEdelbrock
Injection StyleMulti-port
Carburetor Flange Type4-Barrel Square Bore
RPM Range3,500-7,500
Material TypeAluminum
GENERAL
Fuel System TypeEFI
Carburetor QuantityOne
FinishNatural
EGRNo
Intake Section IncludedComplete
Plenum MaterialAluminum
Plenum FinishNatural
Base FinishNatural
Base MaterialAluminum
Throttle Body IncludedNo
Injectors IncludedNo
Aftermarket Fuel Rail RequiredNo
Fuel Rails IncludedNo
Gaskets IncludedNo
Overall Height6.95"
Bolt Hole Pattern5.160" x 5.625"
Runners IncludedNo
Runners RemovableNo
Supplemental Bosses Cast-InNo
Supplemental Bosses MachinedYes
Supplemental Boss Quantity8
Sold in QuantityEach
NotesThe water outlet is machined for use with a small-block Chevy water neck. Fits 355 c.i.d. and up Holden V8 engines that utilize the 1988-98 Holden VN cylinder heads.
GTIN Code085347289455

Questions & Answers

Customer Impersonation Script