Edelbrock 2716 Performer EPS Vortec Intake Manifold, Black/Chrome

Designed specifically for small-block Chevy's with Vortec or Edelbrock E-Tec cylinder heads
Optimized to deliver superior performance over other low-rise dual plane manifolds
Could see gains averaging 5+ ft/lbs. of torque from 3000 to 4500 rpm

Finish:

Black & Chrome Plasma

Color:

Select a color

Starting from

$604.95

/each

In Stock

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Dual Plane Intake Manifold Type, Aluminum

Designed specifically for small-block Chevy's with Vortec or Edelbrock E-Tec cylinder heads
Optimized to deliver superior performance over other low-rise dual plane manifolds
Could see gains averaging 5+ ft/lbs. of torque from 3000 to 4500 rpm
Delivers peak torque around 3500 rpm on a 350-inch engine and produces power from off- idle to 5500 rpm
Constructed from lightweight aluminum and features a plain finish

See more details

Key Specs

MFG. Part #	Select Finish and Color
Intake Manifold Type	Dual Plane
Carburetor Flange Type	4-Barrel Spread Bore
RPM Range	3000 to 4500 rpm
Material Type	Aluminum

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

Details

Edelbrock part #2716 Performer EPS Vortec intake manifold is now available for small-block Chevys with Vortec or Edelbrock E-Tec cylinder heads, the Performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. The runner design is "tuned" for peak torque around 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains averaging 5+ ft-lbs. of torque from 3000 to 4500 rpm for more performance where you need it most. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Will not fit under stock Corvette hood.

Designed specifically for small-block Chevy's with Vortec or Edelbrock E-Tec cylinder heads
Optimized to deliver superior performance over other low-rise dual plane manifolds
Could see gains averaging 5+ ft/lbs. of torque from 3000 to 4500 rpm
Delivers peak torque around 3500 rpm on a 350-inch engine and produces power from off- idle to 5500 rpm
Constructed from lightweight aluminum and features a plain finish
Available in both Black and Chrome Plasma finish

Guides & Documents

Intake Manifolds Installation Instructions (32502716)

CARB Warning

Follow EPA, CARB, and state regulations for engine changes

Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine

CA Prop 65

CARB warning

Specifications

KEY SPECS
MFG. Part #	Select Finish and Color to see
Brand	Edelbrock
Intake Manifold Type	Dual Plane
Carburetor Flange Type	4-Barrel Spread Bore
RPM Range	3000 to 4500 rpm
Material Type	Aluminum

GENERAL
GTIN Code	085347897377

Ratings & Reviews

Be the first to write a review.