-18%
-18%
|
#UP150734
Edelbrock 2701 Performer EPS Chevy Intake Manifold
- Blemished
- This product shows signs of installation or other finish damage, but does not affect use or fitment
- Designed to fit the 1986 and earlier 262-400 cubic-inch Chevys
Discontinued
This is a blemished garage sale item. This product shows signs of installation or other finish damage, but does not affect use or fitment.
This item is currently not available
Shop all Edelbrock Performer EPS Intake Manifolds
Product Summary
Chevy Small Block V8, Carbureted Fuel System Type
- Blemished
- This product shows signs of installation or other finish damage, but does not affect use or fitment
- Designed to fit the 1986 and earlier 262-400 cubic-inch Chevys
- Tuned for peak torque around 3500 rpm on a 350-inch engine and it produces power from off-idle to 5500 rpm
- Gains of 5 hp and 9 ft/lbs. of torque over the standard manifold on a 350 Chevy are dyno-proven
- IMCA Approved intake manifold
- Features a 4-barrel square bore
Key Specs
Garage Sale Type | Blemished |
Intake Manifold Type | Dual Plane |
Carburetor Flange Type | 4-Barrel Square Bore |
RPM Range | Idle-5,500 |
Material Type | Aluminum |
Need To Know
Need help?
855.313.9176Ineligible for Return
Contains items that cannot be returned
Edelbrock 2701 Details
Edelbrock 2701 Details
This is Garage Sale priced because it has been installed, not in brand new condition.
NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS
Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance over other low-rise dual plane manifolds. This small-block Chevy manifold has a runner design thats "tuned" for peak torque around 3500 rpm on a 350-inch engine and it produces power from off-idle to 5500 rpm.
Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the standard Performer manifold on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs. of torque for more performance where you need it most.
IMCA racing approved.
Item Details
IMCA ApprovedNotes
- Match with a dependable Edelbrock square-bore carburetor for maximum STREET performance gains.
- Edelbrock reccommends a 500-650 CFM model.
Charts
325-2701 Instructions (PDF)
Specs
- Port exit dimensions: 1.15" x 1.87"
- Carb pad height: 4.27"
CARB Warning
For race/ off road use or for use on pre-1966 vehicles.
CARB Warning
For race/ off road use or for use on pre-1966 vehicles.
Edelbrock 2701 Specifications
Edelbrock 2701 Specifications
KEY SPECS | |
---|---|
MFG. Part # | 2701 |
Brand | Edelbrock |
Garage Sale Type | Blemished |
Intake Manifold Type | Dual Plane |
Carburetor Flange Type | 4-Barrel Square Bore |
RPM Range | Idle-5,500 |
Material Type | Aluminum |
GENERAL | |
Fuel System Type | Carbureted |
Carburetor Quantity | One |
Finish | Natural |
EGR | No |
Intake Section Included | Complete |
Gaskets Included | No |
Overall Height | 4.27" |
Mounted Height | 4.27" |
Port Height | 1.87" |
Port Width | 1.15" |
Bolt Hole Pattern | 5.160" x 5.625" |
Sold in Quantity | Each |
Notes | Edelbrock reccommends a 500-650 CFM carb. |
GTIN Code | 085347027019 |