Edelbrock 2210 Rollin' Thunder Hydraulic Roller Camshaft, Chevy

1 Question

Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm.
They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s.
You can expect a major improvement in throttle response and torque.

$391.95

Factory Shipped

This part will be shipped by the manufacturer. We estimate this item will ship on or before April 3rd.

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

283, 302, 305, 307, 327, 350, 400, 296 Intake Duration

Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm.
They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s.
You can expect a major improvement in throttle response and torque.
In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams.
All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions.

See more details

Key Specs

MFG. Part #	2210
Brand	Edelbrock
Camshaft Type	Hydraulic Roller Tappet

See more specs

Need To Know

This Product Will Ship Free

Need help?

Quick and Easy Returns

Edelbrock 2210 Details

Edelbrock Rollin' Thunder Camshaft #2210 is designed for small-block Chevy engines from 1957-86 and produce optimum torque from the low-end to the mid-range.

Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm.
They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s.
You can expect a major improvement in throttle response and torque.
In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams.
All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions.

This cam produced 440HP and 425 Ft Lbs of Torque when paired with Pro-Flo XT EFI system #3528 and RPM E-Tec cylinder heads #60975. Must be used with thrust button, high stall torque converter, and stock ratio rocker arms only. Camshaft specifications: - Intake duration: 262 Degrees - Exhaust duration: 266 Degrees - Intake lift: .628" - Exhaust lift: .608" - Lobe separation: 114 Degree - Intake Center Line: 109 Degree - Vacuum: 13"

Guides & Documents

Camshafts Instruction Sheet (3252210)

Camshafts Guide/Document (3252210)

CA Prop 65

CARB warning

Edelbrock 2210 Specifications

KEY SPECS
MFG. Part #	2210
Brand	Edelbrock
Camshaft Type	Hydraulic Roller Tappet

GENERAL
RPM Range	1,500-6,500
Intake Duration	296
Exhaust Duration	300
Intake Duration (.050" Lift)	234
Exhaust Duration (.050" Lift)	238
Intake Valve Lift w/ Rocker Arm Ratio	0.539"
Exhaust Valve Lift w/ Rocker Arm Ratio	0.548"
Lobe Separation	114 °
Computer Controlled Compatible	No
GTIN Code	085347022106
External Ignition Box Required	No
Valve Springs Required	Yes
Gear Attachment	3-Bolt
Sold in Quantity	Each
Notes	This kit uses stock ratio rocker arms. Use with high-stall torque converter only. Requires aftermarket computer chip.