|
#32522076
Edelbrock 22076 Rollin Thunder Hydraulic Roller Camshaft Kit
- This complete cam kits includes:
$1,345.95
/each
Factory Shipped
Quantity
Need Help? Call to Order
Add to a list
Share
Select an engine to verify Fitment
Select Engine
Product Summary
Hydraulic Roller Tappet Camshaft Type, Lifters Included
- This complete cam kits includes:
Key Specs
| Camshaft Type | Hydraulic Roller Tappet |
| Intake Duration (.050" Lift) | 242 |
| Exhaust Duration (.050" Lift) | 240 |
| RPM Range | 1,500-6,500 |
| Lobe Separation | 112 ° |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyEdelbrock 22076 Details
Edelbrock 22076 Details
Edelbrock part #22076 Rollin' Thunder camshaft kit is designed for 1987 And later small-block Chevy 383 V-8 applications.
- This complete cam kits includes:
- Edelbrock Rollin' Thunder hydraulic roller camshaft
- Hydraulic roller lifters
- Pushrods.
- The Rollin' Thunder camshaft kit is ground specifically for use with the corresponding Performer or Performer RPM manifold and cylinder heads. However, Rollin' Thunder camshaft package may also be used with other components designed to operate in a similar RPM range.
- Camshaft Specifications:
- Duration @ .050 Intake: 242 degrees
- Duration @ .050 Exhaust: 240 degrees
- Lift @ Valve Intake: .594"
- Lift @ Valve Exhaust: .594"
- Lobe Separation: 112 Degrees
- Intake Centerline: 107 Degrees
- Idle Vacuum @ 1000 RPM's: 11"
CARB Warning
Follow EPA, CARB, and state regulations for engine changes
CARB Warning
Follow EPA, CARB, and state regulations for engine changes
Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine
Edelbrock 22076 Specifications
Edelbrock 22076 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 22076 |
| Brand | Edelbrock |
| Camshaft Type | Hydraulic Roller Tappet |
| Intake Duration (.050" Lift) | 242 |
| Exhaust Duration (.050" Lift) | 240 |
| RPM Range | 1,500-6,500 |
| Lobe Separation | 112 ° |
| Lifter Type | Hydraulic Roller |
| GENERAL | |
| Intake Valve Lift w/ Rocker Arm Ratio | 0.594" |
| Exhaust Valve Lift w/ Rocker Arm Ratio | 0.594" |
| Computer Controlled Compatible | No |
| Sold in Quantity | Kit |
| Intake Duration | 305 |
| Exhaust Duration | 314 |
| GTIN Code | 085347220762 |
| External Ignition Box Required | No |
| Valve Spring Required | Yes |
| Valve Springs Required | Yes |
| Valve Spring Included | No |
| Lifters Included | Yes |
| Retainers Included | No |
| Locks Included | No |
| Valve Stem Seals Included | No |
| Timing Chain and Gears Included | No |
| Assembly Lubricant Included | No |
| Pushrods Included | Yes |
| Rocker Arms Included | No |
| Gaskets Included | No |
| Gear Attachment | 3-Bolt |
Ratings & Reviews
Ratings & Reviews
Questions & Answers
Questions & Answers
Be the first to ask a question.

