Product Summary

Carbureted Fuel System Type, One Carburetor Quantity

  • Edelbrock part #2194 Performer intake manifold is designed for street 253-304-308 c.i.d. Holden V8 engines.
  • This Performer intake manifold is a dual-plane design that is tuned for excellent throttle response from idle to 5500 rpm.
  • The Performer Holden manifold has been designed to fit both cylinder head bolt hole patterns.
  • Pilot holes have been drilled on each side of the exhaust crossover for early or late model cylinder heads and will need to be drilled out depending on application.
See more details

Key Specs

MFG. Part #2194
Intake Manifold TypeDual Plane
Carburetor Flange TypeDual: Square and Spread Bore
RPM RangeIdle-5,500
Material TypeAluminum
See more specs

Need To Know

Quick and Easy Returns

Return Policy

Edelbrock 2194 Details

Edelbrock Performer Intake Manifold for Holden 253-308 c.i.d Engines. Accepts Either OEM 4-bbl or 4150-Style Square-Bore Carburetors.

  • Edelbrock part #2194 Performer intake manifold is designed for street 253-304-308 c.i.d. Holden V8 engines.
  • This Performer intake manifold is a dual-plane design that is tuned for excellent throttle response from idle to 5500 rpm.
  • The Performer Holden manifold has been designed to fit both cylinder head bolt hole patterns.
  • Pilot holes have been drilled on each side of the exhaust crossover for early or late model cylinder heads and will need to be drilled out depending on application.

Will not fit EFI Heads (see #7594). Accepts both square-bore and spread-bore carbs. Fits Red/Blue/Black engines. Does not have a provision for external heat crossover. Includes Edelbrock square-bore carb adaptor plate #2732, carb gasket and carb studs.

CARB Warning

Follow EPA, CARB, and state regulations for engine changes

Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine

Edelbrock 2194 Specifications

KEY SPECS
MFG. Part #2194
BrandEdelbrock
Intake Manifold TypeDual Plane
Carburetor Flange TypeDual: Square and Spread Bore
RPM RangeIdle-5,500
Material TypeAluminum
GENERAL
Fuel System TypeCarbureted
Carburetor QuantityOne
FinishNatural
EGRNo
Intake Section IncludedComplete
Gaskets IncludedNo
Overall Height3.96"
Bolt Hole Pattern4.250" x 5.625"
Sold in QuantityEach
NotesIncludes Edelbrock square-bore carb adapter plate. Fits 253, 304, or 308 c.i.d. Holden V8 engines with carbureted style heads. Do not use high performance or competition intake gaskets. Pilot holes on the exhaust crossover may need drilled out depending on application. Accepts both square-bore and spread-bore carbs
GTIN Code085347021949

Questions & Answers

Customer Impersonation Script