Menu

Shop

Garage

Cart

Account

Product Summary

361, 383, 400, Carbureted Fuel System Type, Aluminum

  • Edelbrock part #2186 Performer 383 intake manifold is designed for street 361-383-400 c.i.d. Chrysler V8's that measure 7.75" across block.
  • May be used with OEM or aftermarket carbs.
  • Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm.
  • This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.

Key Specs

MFG. Part #2186
Fuel System TypeCarbureted
Intake Manifold TypeDual Plane
Carburetor QuantityOne
Carburetor Flange Type4-Barrel Square Bore

Need To Know

This Product Will Ship Free

Quick and Easy Returns

Details

Edelbrock Performer 383 Intake Manifold for 1966-72 Chrysler "B" Block V8 Engines is Designed for 361-383-400 c.i.d. Accepts OEM 4-bbl or 4150-Style Square-Bore Carburetors; Non-EGR. Works with EGR for 1972-78 400cid w/ OEM 4-bbl. carb.

  • Edelbrock part #2186 Performer 383 intake manifold is designed for street 361-383-400 c.i.d. Chrysler V8's that measure 7.75" across block.
  • May be used with OEM or aftermarket carbs.
  • Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm.
  • This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.

Charts

CARB Warning

Follow EPA, CARB, and state regulations for engine changes

Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine

Specifications

KEY SPECS
MFG. Part #2186
BrandEdelbrock
Fuel System TypeCarbureted
Intake Manifold TypeDual Plane
Carburetor QuantityOne
Carburetor Flange Type4-Barrel Square Bore
GENERAL
RPM RangeIdle-5,500
Material TypeAluminum
FinishNatural
EGRNo
Intake Section IncludedComplete
Gaskets IncludedNo
Overall Height4"
Bolt Hole Pattern5.160" x 5.625"
Sold in QuantityEach
NotesWill work for EGR and non-EGR applications. Please see the charts and guides tab for a comparison of square bore vs spread bore.
GTIN Code085347021864