Product Summary

262, Carbureted Fuel System Type, Idle-5,500 RPM Range

  • Proven to provide at least an 18 horsepower increase
  • A patented runner design ensures a broad torque curve
  • Has an excellent throttle response and mid range power
  • This intake manifold is specially designed for the 4.3L Chevy V6
  • Features a dual-plane high-rise intake with 180 degree firing order

Key Specs

MFG. Part #2111
Intake Manifold TypeDual Plane
RPM RangeIdle-5,500
Material TypeAluminum

Need To Know

This Product Will Ship Free

Shipping Policies & FAQs

Quick and Easy Returns

Return Policy

Edelbrock 2111 Details

Performer 90 Deg. V6 Intake Manifold is designed for street and marine 1985-95 200-229-262 c.i.d. (3.8 and 4.3L) Chevy V6s. Will not accept stock automotive carbs or 262 T.B.I. unit.
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • Produces at Least 18 More Horsepower
  • Best Matched with Edelbrock 500cfm Carburetor


CARB Warning

Follow EPA, CARB, and state regulations for engine changes

Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine

Edelbrock 2111 Specifications

MFG. Part #2111
Intake Manifold TypeDual Plane
RPM RangeIdle-5,500
Material TypeAluminum
Speedway Motors Catalog Part #325-2111
Fuel System TypeCarbureted
Carburetor QuantityOne
Carburetor Flange Type4-Barrel Square Bore
Intake Section IncludedComplete
Gaskets IncludedNo
Overall Height3.84"
Bolt Hole Pattern5.160" x 5.625"
Sold in QuantityEach
NotesWill not accept stock automotive carburetors or 262 TBI unit. Will not fit engines with balance shafts.
GTIN Code085347021116