Part # 3252101
Edelbrock 2101 Performer 1955-86 Small Block Chevy Intake Manifold
by
8 Reviews
|
7 Questions
- Will work with the 1955-1986 302/327/350 Small Block Chevy V8's
- Made from lightweight aluminum with a natural finish
- Has a square and spread bore dual flange
See More
$229.95
each
In Stock
Add to a list
Share
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Chevy Small Block V8, Dual Plane Intake Manifold Type
- Will work with the 1955-1986 302/327/350 Small Block Chevy V8's
- Made from lightweight aluminum with a natural finish
- Has a square and spread bore dual flange
- Bolt hole pattern dimensions measure 4.250" x 5.625"
- Port exit dimensions measure 1.14" x 1.88"
See more details
Key Specs
| MFG. Part # | 2101 |
| Intake Manifold Type | Dual Plane |
| Carburetor Quantity | One |
| Carburetor Flange Type | Dual: Square and Spread Bore |
| RPM Range | Idle-5,500 |
See more specs
Need To Know
This Product Will Ship Free
Quick and Easy Returns
Details
Details
Edelbrock's famous Performer manifold is designed for street 1955-86 small block Chevys. This manifold is a stock replacement/street legal part for 302/327/350 V8s with OEM 4 bbl. or Edelbrock Performer Series carbs. Will also work on 1966-72 (1973 non-California) cars, 1966-83 trucks and Suburbans; except stock equipped EGR.
Performers accept late-model choke, waterneck, air-conditioning, alternator and H.E.I. Not for 1987 and later cast iron or Chevy Bowtie heads. Will not fit 1987 and later stock aluminum heads, due to the angle of the 4 center intake manifold bolts.
Made in the U.S.A.
NOTE: This intake does not work with kickdown kit 491-2350U.
- Carburetor Recommendation: Edelbrock Performer Series carb, 500-650 cfm
- Manifold height @ front: 3.50 "
- Manifold height @ rear: 4.60 "
- Carb pad height: 4.05 "
- Port exit dimensions: 1.14 " x 1.88 "
- Carburetor Recommendation: Edelbrock Performer Series carb, 500-650 cfm
- Manifold height @ front: 3.50 "
- Manifold height @ rear: 4.60 "
- Carb pad height: 4.05 "
- Port exit dimensions: 1.14 " x 1.88 "
Charts
325-2101 Instructions (PDF)
Specifications
Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 2101 |
| Brand | Edelbrock |
| Intake Manifold Type | Dual Plane |
| Carburetor Quantity | One |
| Carburetor Flange Type | Dual: Square and Spread Bore |
| RPM Range | Idle-5,500 |
| GENERAL | |
| Material Type | Aluminum |
| Finish | Natural |
| EGR | No |
| Intake Section Included | Complete |
| Gaskets Included | No |
| Overall Height | 4.05" |
| Mounted Height | 4.05" |
| Port Height | 1.88" |
| Port Width | 1.14" |
| Bolt Hole Pattern | 4.250" x 5.625" |
| Sold in Quantity | Each |
| Notes | This intake will only work with pre '86 cylinder heads. Edelbrock reccommends a 500-650 CFM carb. |
| GTIN Code | 085347021017 |