Dakota Digital Series III instrument systems offer the latest technologies and features for your custom vehicle. High brightness vacuum fluorescent displays provide a lifetime of trouble free use while offering increased accuracy and features!
- Full 6 Gauge Instrument System
- Fits into OEM bezel for 1969- 76 Chevy Nova
- Fluorescent Blue or Teal Display
- Includes Temp, Oil, and Speed Senders
- Push button Calibration
Full 6 Gauge Instrument System includes:
Speedometer, 0 -255 MPH (optional metric version 0- 255 km/h)
Tachometer, 0- 17,500 RPM
Oil Pressure, 0- 99 psi
Water Temperature, 0- 300°F (optional metric version 0- 150°C)
Voltmeter, 8- 17 VDC
Fuel Level, 0- 99%
Standard Colors, Blue or Teal
Includes Temp, Oil, and Speed Senders
Digital Message Centers
Standard Displays
- Odometer (One time user settable, Million Mile)
- Dual (A/B) Trip Meter (0- 9,999.9)
Performance Meters
- 0- 60 MPH Timer (0- 100 kmh)
- 1/4 mile time
- 1/4 mile end speed (trap speed)
- High speed recall
- High RPM recall
Gauges
- Speedometer (0- 255 MPH/kmh) opposite scale of main speedometer.
Built-in Indicators
Indicators
- Turn Signals (Left/ Right)
- High Beam
- Check Engine
- Parking Brake
- Cruise Control (On/ On And Engaged when vehicle is equipped)
- Gear Position (Optional GSS-3000 sensor required)
- 4 x 4 (When vehicle is equipped)
- Wait to Start (When vehicle is equipped)
- Not all OEM indicator lamp functions will be replaced.
Included Sensors
Water Temperature: 1/8" NPT, ground isolated sensor with a 10 ft harness.
Oil Pressure: 1/8" NPT solid state sensor with a 10 ft harness.
Cable Driven Speed Sensor/ Generator: Replaces GM style speedometer cables with a 10 ft harness. Sensor requires approximately 5" clearance extending between the cable drive output and any obstruction. Part # 130011 (sold separately) allows for relocation of the pulse generator when additional clearance is required. (Tremec and Ford style adaptors available on request.)
Bushings: Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads.
Control Box Dimensions: 5.5" x 3.5"x 1"
Calibration
Pushbutton: Dakota Digital instruments are programmed and operated by the push of a button. Simply mount the included pushbuttons supplied with your gauges in a convenient and easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count and the fuel level gauge. Once properly configured these same buttons are used to access the wealth of information located in the Digital Message Centers.