|
#6178565
Mustang II 7/16-24 DOT Braided Stainless Brake Hose Kit
- This brake line kit is DOT approved which allows it to be used on street driven vehicles
- Stainless steel braid over Teflon® hose allows the hose to maintain flexibility while being abrasion resistant
- 3/8"-24 IFF frame adapter fittings are included to allow for easy connection of 3/16" steel brake lines
$79.99
/kit
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
-3 AN Brake Hose Size, 19" Brake Hose Length
- This brake line kit is DOT approved which allows it to be used on street driven vehicles
- Stainless steel braid over Teflon® hose allows the hose to maintain flexibility while being abrasion resistant
- 3/8"-24 IFF frame adapter fittings are included to allow for easy connection of 3/16" steel brake lines
- Frame tabs can be bolted or welded on and feature a spring clip for retaining the frame adapter
- 7/16"-24 thread banjo bolts and crush washers are included to create a leak free seal
Key Specs
| MFG. Part # | 6178565 |
| Brand | Speedway Motors |
| Brake Hose Size | -3 AN |
| Brake Hose Length | 19" |
| Brake Hose Material | Stainless Steel Braided |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 6178565 Details
Speedway Motors 6178565 Details
DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.
- Stainless steel braid over Teflon® hose
- Reduces volumetric expansion of brake lines
- Reduces brake fade
- Less susceptible to debris than rubber line
Item Details
1974-77 Mustang II with 7/16"-24 caliper threadsSpeedway Motors 6178565 Specifications
Speedway Motors 6178565 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 6178565 |
| Brand | Speedway Motors |
| Brake Hose Size | -3 AN |
| Brake Hose Length | 19" |
| Brake Hose Material | Stainless Steel Braided |
| GENERAL | |
| Hose OD | 0.25" |
| Brake Hose Fitting Size | -3 AN to 3/8"-24 IFF | 7/16" Banjo |
| Overall Length | 19" |
| Fitting End A | 3/8"-24 I.F. Female |
| Fitting End B | 7/16" Banjo |
| Hardware Included | Yes |
| Sold in Quantity | Kit |
| Notes | DOT approved. |
Ratings & Reviews
4.7
37 Reviews
Customers appreciate the high quality and utility of our product. Mostly used in automotive applications, they cited examples such as its use with lowering spindles, Mustang II-style front disk brake systems, and disc brake conversions. Users praised the product's length, ease of installation, and compatibility with their vehicles. While a few had initial difficulties with the banjo style end or line alignment, quick, easy modifications were made. It was noted that our brake lines outperformed those from other companies, both in terms of fit and quality. Some users highlighted the visual appeal of our stainless steel lines as an upgrade. Most customers recommended our product and would buy it again.
Ratings & Reviews
4.7
37 Reviews
Customers appreciate the high quality and utility of our product. Mostly used in automotive applications, they cited examples such as its use with lowering spindles, Mustang II-style front disk brake systems, and disc brake conversions. Users praised the product's length, ease of installation, and compatibility with their vehicles. While a few had initial difficulties with the banjo style end or line alignment, quick, easy modifications were made. It was noted that our brake lines outperformed those from other companies, both in terms of fit and quality. Some users highlighted the visual appeal of our stainless steel lines as an upgrade. Most customers recommended our product and would buy it again.
4.7
37 reviews
5
31
4
4
3
1
2
0
1
1
Most Liked Positive Review
5.0
Good quality fast shipping
I used these along with my lowering spindles for my pinto and they worked well only minor modifications were needed on the brake caliper so the banjo style end would sit all of the way down quick easy fix only thing I would say is that it would be nice if it can with some way to hang the line but got it figured out
Most Liked Negative Review
3.0
only fit for mustang II rotors
would probably be a better design if the caliper end was a 7/16/24 thread straight connection, like the stock mustang II hose, the rotor is not designed for a abanjo type fitting, it's not knerled and is resessed?
Filter by Ratings
I will buy this again if needed
5.0
3 months ago
Pops
Daytona Beach Florida
Verified
Use this on a 32 ford with a mustang two front suspension with lower spindles the factory lines rubbed the top of the attachment to the a frame
Would Recommend
I will continue ordering my parts from Speedway!
5.0
6 months ago
Grumpy
Meadville PA
Verified
These brake lines are perfect! They enabled me to complete brake lines on my 40 Ford street rod. Speedway has been my go to source for the parts to finish my project.
Would Recommend
yes
5.0
10 months ago
MW
blackhawk
Verified
worked great
Would Recommend
Yes
5.0
a year ago
Theoj
Oshkosh ,wi
Verified
Replaced the front brakes on my mustang II front suspension in my 1933 Chevrolet street rod
yes
5.0
a year ago
toro
east bay
Verified
AAAAAAAAAAAAAAAAAAAAAAAAAAA+++++++++++++++++++++++++
Would Recommend
Great product!
5.0
a year ago
Doug
Cleveland ohio
Verified
Great fit and great product. Worked perfect for front manual disc on 67 galaxie!
Would Recommend
yes
5.0
2 years ago
gman
ftwayne in
Verified
its easy to put on and it fits
Would Recommend
Good quality fast shipping
5.0
3 years ago
Orton
Iowa
Verified
I used these along with my lowering spindles for my pinto and they worked well only minor modifications were needed on the brake caliper so the banjo style end would sit all of the way down quick easy fix only thing I would say is that it would be nice if it can with some way to hang the line but got it figured out
Would Recommend
It stops again
5.0
3 years ago
Bens 39 pu
Richland WA
Verified
They work perfect my 39 Chevy pickup is back on the road again thank you very much
Would Recommend
Seems to be a high quality set of lines. I'll use them again
5.0
4 years ago
Jason
Lewiston id
Verified
I used these on a 14 bolt disc brake conversion, they worked well.
Would Recommend
Showing 10 of 37 reviews
Questions & Answers
Questions & Answers
6 Questions • 8 Answers
Hello I converted my 54 Chevy pickup front end to a mustang 2 front end and need brake line will these line work for me ?
by butch
• 8 years ago
2 answers
View Answers
Hi Have u got this kit with rubber Hoses instead of SS? Need to be period correct 1967
by Bjorn
• 8 years ago
2 answers
View Answers
The bold type heading says 7/16-24 but the text under info says 3/8-24. which one is correct?
by Ray
• 9 years ago
1 answer
View Answer
can I use 3/8-24 banjo bolts I am using Ranger calipers. They have 3/8-24 banjo bolts. Can I buy 3/8-24 banjo bolts and use then with these brake lines. If so what part number. Thanks, Art.
by peruart
• 11 years ago
1 answer
View Answer
What is the length
by Lunitic
• 12 years ago
1 answer
View Answer
LENGTH OF LINES i NEED TO NO HOW LONG THE LINES ARE
by DSMOLD
• 13 years ago
1 answer
View Answer
6 of 6 questions shown
Fitment
Fitment
1974-1977 Ford Mustang II