|
#91095302
$5.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 3.188" Overall Length, Steel, Black
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThis wheel stud manufactured from Currie Enterprises is made of a high strength steel. Its press-in design makes it stronger than stock. These wheel studs are sold individually.
Recommended drill bit size is 19/32" (0.5938")
Recommended Press Fit for press-in wheel stud
Tech Tip: If nearest standard drill bit is too small, you will need to use an appropriately sized reamer to enlarge the drilled hole until it is within the tolerance for the desired press fit.
Specs
Nose Dia 0.428 x .250" long
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 95302 |
| Brand | Currie |
| Thread Pitch | 1/2"-20 |
| GENERAL | |
| Overall Length | 3.188" |
| Knurl Diameter | 0.610" |
| Knurl Length | 0.330" |
| Thread Length | 2.125" |
| Head Diameter | 0.758" |
| Material Type | Steel |
| Finish | Black |
| Sold in Quantity | Each |
| Notes | KNURL DRILL 19/32 (.593) |
5
11 Reviews
Customers highly recommend our product, finding it strong, practical, and of high quality. They have acknowledged its usability in various contexts, ranging from installing late model wheels on classics, replacing or customizing drilled rotors or drums, or for use on race cars and street rods. The product fitting correctly and its durability even under rough use highlights its superior quality and practicality. Users also appreciate its affordability. The product's value-for-money and versatile application stand out among its competitive qualities.
5
11 reviews
5
11
4
0
3
0
2
0
1
0
Filter by Ratings
Very nice part
5.0
3 years ago
my car
SC
Verified
I bought 10 singles for less than the 10 pk they
Would Recommend
Definitely worth it
5.0
4 years ago
DBrock
Phoenix
Verified
Strong
Longer Lug Studs
5.0
7 years ago
65 Stang
Arizona
Verified
Putting late model wheels and tires on my classic as shop rollers while it is under construction and clear the 12 1/2 inch rotors I have installed. The problem is, the classics cant handle the deep backset of the later model wheels. The solution is a wheel spacer which created a new problem... studs were too short. These studs solved that problem and I got the wheel on the car.
Would Recommend
Great !
5.0
7 years ago
jsbiohazard
Omaha, ne
Verified
Needed longer lugs for aluminum wheels and these were just the ticket
Would Recommend
wheel studs
5.0
8 years ago
Mick
Puyallup, WA
Verified
studs were installed no problems looking good
Would Recommend
I would recommend this product to my friends
5.0
9 years ago
Steve
Cypress, Tx
Verified
Fits correctly, great pricing, just what I needed.
Would Recommend
Great for racing and street rods
5.0
9 years ago
Tommy Wright
Louisville ky
Verified
Great strength to use on a race car and great look for a street rod
Would Recommend
I would purchase from Speedway again
5.0
9 years ago
Big Sexy
Springfield Ohio
Verified
Just what I was looking for. Got us back up and running
Would Recommend
Great for custom rotor setup
5.0
9 years ago
Chris
Indianapolis IN
Verified
Good for replacement or custom drilled rotors or drums to create custom lug pattern
Would Recommend
great product
5.0
10 years ago
donkey
twin lakes wi
Verified
seem to be holding up to my abuse
Would Recommend
Showing 10 of 11 reviews
4 Questions • 5 Answers
What is the length of the knurled shoulder?
by Andy
• 4 years ago
1 answer
View Answer
are they 1/2 20? doesn't list thread pitch
by tony
• 10 years ago
1 answer
View Answer
Will these fit a 2005 gmc serria 1/2 ton
by mitch
• 11 years ago
1 answer
View Answer
Will the studs fit 89 s10
by 24bob10
• 11 years ago
2 answers
View Answers
4 of 4 questions shown
