|
#54537025
Competition Engineering C7025 2 Degree Wedge Plates
$41.99
/pair
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Key Specs
| MFG. Part # | C7025 |
| Brand | Competition Engineering |
| Overall Length | 5.0625" |
| Overall Width | 2" |
| Material Type | Aluminum |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyCompetition Engineering C7025 Details
Competition Engineering C7025 Details
- Used to adjust pinion angle or change traction bar angle on leaf spring equipped cars and trucks
- Allows pinion angle change in 2° increments
- Made from 6063-T5 aluminum, they won’t crack like cast zinc
- Interlocking ribs allow plates to be stacked without sliding and eliminate unwanted pinion angle change
- 2" wide
- Two per package
Specs
2” wide
5-1/16” long
0.538” ID hole
.300” thick on the thick end
.200” thick in the center
.120” thick on the thin end
Competition Engineering C7025 Specifications
Competition Engineering C7025 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | C7025 |
| Brand | Competition Engineering |
| Overall Length | 5.0625" |
| Overall Width | 2" |
| Material Type | Aluminum |
| GENERAL | |
| Sold in Quantity | Pair |
| GTIN Code | 084663070259 |
| Pin Diameter | 0.538" |
Ratings & Reviews
5
6 Reviews
Customers appreciate the product for its quality and practicality, highlighting its perfect fit, ease of installation, and robust design. Buyers particularly noted its adequacy for specific needs, like alignment for Competition Engineering traction bars. Despite minor adjustments, such as enlarging centre holes, users recommended it for its superior features compared to competitors. Its functionality and adaptability, such as optional use with 2 degree wedge plates, received positive feedback.
Ratings & Reviews
5
6 Reviews
Customers appreciate the product for its quality and practicality, highlighting its perfect fit, ease of installation, and robust design. Buyers particularly noted its adequacy for specific needs, like alignment for Competition Engineering traction bars. Despite minor adjustments, such as enlarging centre holes, users recommended it for its superior features compared to competitors. Its functionality and adaptability, such as optional use with 2 degree wedge plates, received positive feedback.
5
6 reviews
5
6
4
0
3
0
2
0
1
0
Filter by Ratings
Great product.
5.0
6 years ago
Buiford
Rainier, Wa.
Verified
Just what I needed, as always.
Would Recommend
good part good service
5.0
7 years ago
brokenarrowpaa
cincinnati ohio
Verified
it did what they said it would due will see if it holds up
Would Recommend
Good wedge plates
5.0
7 years ago
Wild Bill
Alabama
Verified
I bought these 2 degree wedge plates just in case the six degree were not enough. So far it looks like I won't need them but at lease I have them if I do.
Would Recommend
I would use this product again
5.0
7 years ago
Falconstein
Maine
Verified
Easy to install, worked great!
Would Recommend
Good Product
5.0
8 years ago
Travelin' Jake
Sugar Land, Texas
Verified
Wedges were what was needed to get proper alignment for Competition Engineering traction bars fitted under my '68 Mustang.
Would Recommend
CE wedge plates
5.0
8 years ago
Pedro
SW VA
Verified
LIked the quality and design of wedges; had to enlarge center hole substantially to accommodate the spring tie bolt diameter.
Would Recommend
Showing 6 of 6 reviews
Questions & Answers
1 Question • 1 Answer
Questions & Answers
1 Question • 1 Answer
How thick are these at the "fat" end?
by tom
• 8 years ago
1 answer
View Answer
1 of 1 questions shown