|
#91013870
$20.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 1-1/2 Inch Exhaust Tubing Diameter, Raw
| MFG. Part # | 91013870 |
| Brand | Speedway Motors |
| Exhaust Tubing Diameter | 1-1/2 Inch |
| Exhaust Pipe Type | Header Tubing |
| Outside Diameter | 1.50" |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyCA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91013870 |
| Brand | Speedway Motors |
| Exhaust Tubing Diameter | 1-1/2 Inch |
| Exhaust Pipe Type | Header Tubing |
| Outside Diameter | 1.50" |
| GENERAL | |
| Material Type | Mild Steel |
| Finish | Raw |
| Exhaust Pipe Bend Style(s) | Assorted Bends |
| Exhaust Pipe Bend Angle(s) | 90 degree | 180 degree |
| Color | Natural |
| Material Thickness | 0.06" |
| Mandrel Bent | Yes |
| Overall Length | 23.00" |
| Overall Width | 12" |
| Sold in Quantity | Each |
| Notes | The two bends are 90 and 180 degrees. |
4.9
81 Reviews
Customers highlighted the product’s high quality and durability, using it for various applications, such as building headers and exhaust systems for cars, motorcycle custom pipes, and even unique uses like grounding frameworks for LED flags. Its strength and the wide selection of sizes were commended. Customers appreciated the tubing's nice and consistent bends, ease of welding, and rust-resistant material quality. Many used it to customize their projects and spoke highly of its usability and practicality. Several customers mentioned that they would buy the product again due to its high performance and adaptability, making it a preferred choice over competitors.
4.8
81 reviews
5
74
4
4
3
2
2
0
1
1
Most Liked Positive Review
5.0
Great value
I got 2 of these to make a custom driver-side header for a 5.0-swapped BMW E30. I already had one made, but it was ugly and poorly designed. The pipe welded good after cleanup -- I didn't try welding it with the dark finish still on it. I also used a very unconventional welding method: stick welding with 1/8" 6011 rods. We ran out of welding wire a while back, and I've been using what we have for the time being. Turning the amperage down and making faster passes going vertically allowed for it to not burn through. The only thing that turned out to be a nuisance in the end but isn't too big of a deal, is all the metal shavings from cutting it sticking to the oil inside that the pipes are packaged with to prevent rusting. It would be best to clean them out before cutting them.
Most Liked Negative Review
3.0
Just what I wanted
This gave me the bends and straights to rework my headers
Filter by Ratings
You bet, had to modify the headers on the 406 Sbc
5.0
6 months ago
Kenny
Charlotte, Michigan
Verified
They were exactly what I needed, and the job turned out great.
Would Recommend
Just what I wanted
3.0
a year ago
Jfe3
Chicago
Verified
This gave me the bends and straights to rework my headers
Would Recommend
Pipe bends
5.0
a year ago
Joe
Santa Rosa
Verified
these worked great. I mounted the motor amidship and the radiator in the back, so I used the pipe for radiator hoses. So far, so good.
Would Recommend
I would buy this product again.
5.0
a year ago
29 Roadster
Central coast Ca
Verified
I haven't used the tubes yet but they are exactly as advertised and will make a great set of headers.
Would Recommend
If i were to made another set of headers I would use these.
5.0
a year ago
firedome8
illinois
Verified
Long tube headers for 270 Dodge Hemi.
Would Recommend
Just what I needed
5.0
a year ago
CP
KS
Verified
Used for a miscellaneous home project. The variety of bends comes in handy to apply in various applications.
Would Recommend
I would buy again
5.0
a year ago
Bone
Pittsburgh pa
Verified
Worked out very well for my use. Very fast delivery.
I would buy again for my next project
5.0
2 years ago
Joe
Carmicheal ca,
Verified
I used these to make coolant passages instead of rubber. Worked great. Would definitely recommend them.
Would Recommend
I have put together two custom exhaust systems use these.
5.0
2 years ago
2Row
Los Angeles
Verified
You can save a lot of money making custom exhaust when needed.
Would Recommend
good part but mandrel bend is not consistent
4.0
3 years ago
Randall
Waynesboro, GA
Verified
If you plan to buy this to chop up the 180 degree bend be aware the bend is not consistent so have a exhaust pipe expander to round out the connections for a tight fit up during welding. I will absolutely buy it again.
Would Recommend
Showing 10 of 81 reviews
4 Questions • 4 Answers
What is the center line bend radius of the 1 1/2 tubing?
by choppin
• 10 years ago
1 answer
View Answer
What is the wall thickness of this tubing?
by
• 15 years ago
1 answer
View Answer
what is the o.d. size
by
• 15 years ago
1 answer
View Answer
What is the radius of the end that is bent 180 degrees?
by vega427
• 15 years ago
1 answer
View Answer
4 of 4 questions shown
