Collapsible Steering Column and U-Joint Kit

#91605074

Collapsible Steering Column and U-Joint Kit

Name: Collapsible Steering Column and U-Joint Kit
Brand: Speedway Motors
SKU: 91605074
Price: 329.99 USD
Availability: InStock
Rating: 3.7 (3 reviews)

3 Reviews

Ask a Question

Crashing hard can leave a big dent in your chest, our collapsible steering columns are not only safer but much easier to install
Comes with our Speedway Collapsible Steering Column and a Sweet Mfg. Weld-On U-Joint 3/4"-20 Spline to 3/4" Round
Our steering column is adjustable from 22.5" to 32" in overall length and includes a quick-release steering wheel hub

$329.99

/kit

In Stock

$335.98

Save $5.99

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Universal Fit, Universal Mount Type, Dash Key Location

Crashing hard can leave a big dent in your chest, our collapsible steering columns are not only safer but much easier to install
Comes with our Speedway Collapsible Steering Column and a Sweet Mfg. Weld-On U-Joint 3/4"-20 Spline to 3/4" Round
Our steering column is adjustable from 22.5" to 32" in overall length and includes a quick-release steering wheel hub
The U-joint is made of forged vanadium steel with a black oxide finish making it one of the strongest and corrosion resistant steering components
Maximum operating for the u-joint is 30 degrees, if a greater angle is needed we recommend adding another u-joint to take stress off the steering mechanism

Comes as a Kit

View Kit Components

See more details

Key Specs

MFG. Part #	91605074
Mount Type	Universal
Column Type	Straight
Shifter Location	Floor
Key Location	Dash

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

Installation Details

Steering Shaft and U-Joint Selection Guide

Installation Tips

Tech Tip #1: When using more than two universal joints in a system, a support heim must be used.

Tech Tip #2: Increasing a U-Joint's angle of operation beyond 30° dramatically increases the stress on the joint, weakening the whole steering mechanism. If a greater angle is needed, add another u-joint.

When purchasing U-Joints, 3 easy steps will help ensure that they will be correct for your application.

STEP 1
Be sure to measure the diameter of the shaft and count the number of splines on the shaft. Some shafts have a blank spot ground on one side. To get the correct number of splines, use a flat edge and cover the blank half of the shaft through the diameter and count the splines on the other half. Multiply that number by 2, thus giving you the total number of splines on the full circumference of the shaft.

STEP 2
Choose which shaft type best suits your application: 3/4" weld on, 3/4" DD or 1" DD.

STEP 3
With these two pieces of information at hand, refer to our chart to find the appropriate part number of the u-joint for your specific application.

Have a Question?

Call one of our U.S.-based customer service professionals.

Tech Support - Opens at NaNpm (UTC)

Speedway Motors 91605074 Details

Kit Includes:

(1) Speedway Collapsible Steering Column

(1) Sweet Mfg. Weld-On U-Joint 3/4 Inch-20 Spline to 3/4 Inch Round

Speedway Collapsible Steering Column

If you have ever crashed hard, you know the steering column can leave a big dent in your chest. These collapsible steering columns are not only safer, but much easier to install. Includes easy-install steering wheel disconnect and 3/4" mounting rod end. Adjustable from 22-1/2" to 32" in length.

22-½ to 32” column measured from the end of the shaft to the base of the quick release hub
Quick release hub adds an additional 2” to the overall length
O.D. of the main body is 1.125"
O.D. of the bottom shaft is .750 and 20 spline
Splined end accepts a variety of U-joint for attachment to your steering shaft or gear
O.D. of the main hub sleeve is 2.525”
O.D. of the hub sleeve flange is 3.17”
Centerline of column to end of threads on ¾” heim mount is 3”
Heim mount is adjustable forward/rearward to suit customers mounting requirements
Column Type: Straight
Shifter Location: Floor
Overall Length: 32"
Spline OD: 0.75"
Spline Count: 20
Collapsible: Yes

Sweet Mfg. Weld-On U-Joint 3/4 Inch-20 Spline to 3/4 Inch Round

Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. All of these steering universal joints have 3/4 weld-on ends. U-joints available for round or double D shaft.

Full compliment bearings
Forged Vanadium steel yokes and u-joint
Highest quality for racing
Features needle bearing u-joints
U-Joint=3.875" L x 1.375" D
Universal Joint Style: Single Joint
End #1: 3/4" Round
End #2: 3/4"-20 Spline
Spline Count: 20
Spline End: 3/4"-20
Overall Length: 3.75"
Outside Diameter: 1.355"
Max Operating Angle: 30 °
Set Screw Included: Yes
Material Type: Steel

Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Guides & Documents

Steering Shaft and U-Joint Selection Guide

Speedway Motors 91605074 Specifications

KEY SPECS
MFG. Part #	91605074
Brand	Speedway Motors
Mount Type	Universal
Column Type	Straight
Shifter Location	Floor
Key Location	Dash
Overall Length	32"
Finish	Natural
Output Shaft Type	3/4" 20-spline
Tube O.D.	1.125"
Material Type	Steel
Collapsible	Yes
Spline Count	20
Spline OD	0.75"

GENERAL
Sold in Quantity	Kit

Ratings & Reviews

3.7

3 Reviews

Overall Assessment

Customers appreciate the product for its remarkable quality and value for money. However, some have experienced compatibility issues, but resolved it with some adjustments. Most reviews affirm its USA-made quality, with the product performing smoothly and effectively once suited. The product exemplified the saying "you get what you pay for," enhancing its perceived value and desirability. Its practicality is also acknowledged, with customers endorsing it as "good stuff."

Write A Review

3.7

3 reviews

Filter by Ratings

Sort Reviews

Best value

5.0

4 years ago

Bob

Massachusetts

Verified

Can't beat the quality for the price!

Would Recommend

You get what you pay for.

1.0

5 years ago

Penguin

Kyle, Texas

When I excitedly unwrapped the newly arrived package and trial fit the made-in-the-USA Sweet u-joint onto the end of Speedway column my heart sank. It was a no go. Checked the male and female splines; no burrs. It simply did not mate. The quick release hub worked, but not smoothly. I kept the u-joint and returned the column. I ordered a made-in-the-USA Sweet column. It arrived soon after and fit the u-joint and the hub came off and on smoothly. You get what you pay for.

Would Not Recommend

Good product

5.0

6 years ago

Billy

Crestview Florida

Verified

Good stuff

Would Recommend

Showing 3 of 3 reviews

Questions & Answers

Be the first to ask a question.