Product Summary

Grooved Bearing, Upper Groove Location

  • Designed to be used with crankshafts that have oversize fillets and where engines run in the medium to high RPM range
  • Engineered primarily for use in NASCAR type racing, but they are suitable for all types of competition engines
  • Will fit all 1970-1980 S/B Chevy 400 c.i. V-8 engines
  • The X001 option has .001" more bearing/oil clearance
  • Available in several sizes to better suit your needs
See more details

Key Specs

MFG. Part #
BrandClevite
Bearing MaterialTri-metal copper-lead nickel
See more specs

Need To Know

Quick and Easy Returns

Return Policy

Details

Clevite's H-Series was developed primarily for use in NASCAR type racing, but they are suitable for all types of competition engines. These sets are for 1970-1980 S/B Chevy 400 c.i. V-8 engines.
  • Use H-series bearings with crankshafts that have oversize fillets and where engines run in the medium to high RPM range.
  • H-Series bearings should be used if contact patterns obtained with P-series parts are too narrow. Contact pattern should ideally cover 2/3 to 3/4 of the bearing surface.
  • The X001 option has .001" more bearing/oil clearance
  • If you aren't sure which type of performance bearing to start with, the H-Series will be your best choice.

Charts

CARB Warning

For race/ off road use or for use on pre-1966 vehicles.

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway, or if installed in vehicles model-year 1965 or older; motorcycles model-year 1977 or older; or off-highway recreational vehicles (such as off-road motorcycles and all-terrain vehicles) model-year 1996 and older. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

Specifications

KEY SPECS
MFG. Part #
BrandClevite
Bearing MaterialTri-metal copper-lead nickel
GENERAL
Grooved BearingYes
Groove LocationUpper
Groove Style3/4
GTIN Code

Questions & Answers

2 Questions • 2 Answers

My bearings have MB 2562H on the back. Is this the same bearing?

by adam

• 9 years ago

1 answer

Do they make this bearing 400 block with 350 crank and the X .001 extra clearance?

by ODR/Don

• 10 years ago

1 answer

2 of 2 questions shown

Customer Impersonation Script