Menu

Shop

Garage

Cart

Account

Product Summary

Chevy LS V8, Long Block Crate Engine Type

  • With Chevrolet Performance’s aggressive ASA camshaft installed in the LS3 6.2L engine, it comes alive with 525 uncompromising horsepower
  • The ASA camshaft is a hydraulic roller with .525-inch lift on both sides, along with 226 degrees duration on the intake side and 236 degrees on the exhaust side
  • And for durability, Chevrolet Performance complement the cam with higher-rate valve springs

Key Specs

MFG. Part #19419866
BrandChevrolet Performance Parts
Crate Engine TypeLong Block
Engine Displacement376 cu. in.

Need To Know

Truck Ship

Truck shipments must be pre-paid with a credit card, certified check or money order

Quick and Easy Returns

Return Policy

Details

Fuel-injected ferocity 

With Chevrolet Performance’s aggressive ASA camshaft installed in the LS3 6.2L engine, it comes alive with 525 uncompromising horsepower.

Take-no-prisoner performance 

The ASA camshaft is a hydraulic roller with .525-inch lift on both sides, along with 226 degrees duration on the intake side and 236 degrees on the exhaust side. And for durability, Chevrolet Performance complement the cam with higher-rate valve springs.

LS376-525 Tech Specs

  • Engine Type: LS-Series Gen-IV Small-Block V-8
  • Displacement (cu. in.): 376 (6.2L)
  • Bore x Stroke (in.): 4.065 x 3.622 (103.25 x 92 mm)
  • Block: Cast aluminum with six-bolt, cross-bolted main caps
  • Crankshaft: Nodular iron
  • Connecting Rods: Powdered metal
  • Pistons: Hypereutectic aluminum
  • Camshaft Type: Hydraulic roller
  • Valve Lift (in.): 0.525 intake / 0.525 exhaust
  • Camshaft Duration (@0.050 in.): 226° intake / 236° exhaust
  • Cylinder Heads: Aluminum L92-style port; “as cast” with 68-cc chambers
  • Valve Size (in.): 2.165 intake / 1.590 exhaust
  • Compression ratio: 10.7:1
  • Rocker Arms (int): Investment-cast, roll trunnion
  • Rocker Arms (exh): Investment-cast, roll trunnion
  • Rocker Arm Ratio: 1.7:1
  • Recommended Fuel: Premium pump
  • Maximum Recommended rpm: 6600
  • Reluctor Wheel: 58X
  • Balanced: Internal

Charts

CARB Warning

Follow EPA, CARB, and state regulations for engine changes

Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine

Specifications

KEY SPECS
MFG. Part #19419866
BrandChevrolet Performance Parts
Crate Engine TypeLong Block
Engine Displacement376 cu. in.
GENERAL
Horsepower525 horsepower
Compression Ratio10.7:1
Torque489 ft./lbs.
Camshaft TypeHydraulic Roller Tappet
Cylinder Head MaterialAluminum
Piston MaterialHypereutectic Aluminum
Crankshaft MaterialNodular Iron
Spark Plug StyleStock
Combustion Chamber Volume68cc
Camshaft Duration (.050 in)226° intake / 236° exhaust
Camshaft Lift (in).525 intake / .525 exhaust
Bore x Stroke (in)4.060" x 3.620"
Carburetor IncludedNo
Intake Manifold IncludedYes
Distributor IncludedNo
Connecting Rod MaterialPowdered Metal
Warranty2 year / 50,000 mile
Valve Covers IncludedYes
AssembledYes
Engine BalanceInternal
Cylinder Heads IncludedYes
Rear Main Seal Style1-piece
Throttle Body IncludedYes
Oil Pan IncludedYes
Timing Cover IncludedYes
Water Pump IncludedYes
Harmonic Balancer IncludedYes
Flexplate IncludedNo
Flywheel IncludedNo
Air Cleaner IncludedNo
Spark Plugs IncludedYes
Spark Plug Wires IncludedYes
Computer IncludedNo
Wiring Harness IncludedNo
Intake Valve Diameter2.165"
Exhaust Valve Diameter1.59"
Cylinder HeadsAluminum L92 style ports
Rocker ArmsInvestment-cast, roller trunnion
Rocker Arm Ratio1.7:1
Recommended FuelPremium
BlockCast-aluminum with six-bolt, cross-bolted main caps
Sold in QuantityEach