|
#91045111
CPP 45111 Universal Fuel Tank Return Fitting, 1/4 In NPT To 6 AN
- Easily Add a Return Line to Your Existing Fuel Tank
- 1/4" NPT to 6AN Fitting
- Simple Installation With Clean Results
$18.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Product Summary
-6 AN Male Fitting End A, 1/4" NPT Fitting End B, Black
- Easily Add a Return Line to Your Existing Fuel Tank
- 1/4" NPT to 6AN Fitting
- Simple Installation With Clean Results
- Works on Material Up To 1/4" Thick
- Kit Comes With All Necessary Hardware For Installation
Key Specs
| Fitting End A | -6 AN Male |
| Fitting End B | 1/4" NPT |
| Angle | Straight |
| Material Type | Aluminum |
| Finish | Anodized |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyCPP 45111 Details
CPP 45111 Details
If you are installing an in-line fuel pump or an aftermarket fuel-injection setup but are using an original fuel tank not originally provisioned for a return line, this universal return line fitting kit is a simple and inexpensive way to add one to your existing setup without having to go through the hassle of pulling your old tank and installing an expensive, brand new tank. To install this fitting drill a hole in the fuel tank where you would like to position your return line, place the bung against the tank along with the supplied gasket, and use the supplied bolt with washer to effectively rivet the fitting in place. Once the bung is secure, remove the bolt and install the 1/4" NPT fitting and you're all set. This fitting can also be used for other applications such as adding a vent line or power steering return line, whatever you might need where a return line was not originally installed.
- Easily Add a Return Line to Your Existing Fuel Tank
- 1/4" NPT to 6AN Fitting
- Simple Installation With Clean Results
- Works on Material Up To 1/4" Thick
- Kit Comes With All Necessary Hardware For Installation
- Can Be Used For Other Applications Such as Vent Lines or Power Steering Return Lines as Well
Guides & Documents
CPP 45111 Specifications
CPP 45111 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 45111 |
| Brand | CPP |
| Fitting End A | -6 AN Male |
| Fitting End B | 1/4" NPT |
| Angle | Straight |
| Material Type | Aluminum |
| Finish | Anodized |
| Color | Black |
| GENERAL | |
| Fitting Style | Adapter |
| Fitting Category | AN to NPT |
| AN Size | -6 AN |
| NPT Size | 1/4" NPT |
| Swivel | No |
| O-Rings Included | Yes |
| Gauge Port | No |
| Sold in Quantity | Each |
| Thread Pitch | 9/18" - 18 |
Ratings & Reviews
5
9 Reviews
Customers confirmed the product's high quality, practicality, and efficient performance. Users needed a return line for fuel injection purposes and found the fitting to perform excellently. Others used it successfully on classic cars such as the '55 Bel Air, demonstrating its versatility. Our fitting works wonderfully in varying situations, outshining competitors. Recommendation rates are high due to these reliable, stellar attributes.
Ratings & Reviews
5
9 Reviews
Customers confirmed the product's high quality, practicality, and efficient performance. Users needed a return line for fuel injection purposes and found the fitting to perform excellently. Others used it successfully on classic cars such as the '55 Bel Air, demonstrating its versatility. Our fitting works wonderfully in varying situations, outshining competitors. Recommendation rates are high due to these reliable, stellar attributes.
5
9 reviews
5
9
4
0
3
0
2
0
1
0
Filter by Ratings
Yes I would buy again.
5.0
4 months ago
HOPE
MICH
Verified
It worked grate to convert your stock fuel tank to a fuel injection tank.
Would Not Recommend
Worked as advertised.
5.0
a year ago
FirstGenCamaro
Scottsdale, AZ
Verified
Used this in a '68 Camaro, original fuel tank, Holley in-tank electric fuel pump, with Atomic EFI. The previous owner didn't have a recirc line and while the pump is supposed to be PWM, it burned out more than once. Since using this bung and a pressure regulator, have had no problems.
Would Recommend
Brilliant design
5.0
a year ago
A-mart
Windham, ME
Verified
The parts that are being produced these days are often cheap and you get what you pay for. This is not the case here. You can tell that this is machined well and is well thought out. It will allow you to easily add a return fitting to a fuel system that was designed without one
Would Recommend
Buying for all my ls swaps, great product
5.0
2 years ago
Zynryn
Ohio
Verified
Used on my stick 67 c10 tank, works perfectly
Would Recommend
I will buy this product again.
5.0
2 years ago
Dave
Columbus, Ohio
Verified
Installing a 5.3 LS into an mgb. Fitting worked perfect on the return line.
Would Recommend
Great part
5.0
2 years ago
Chip
Fort Wayne Indiana
Verified
Perfect if your application doesn't have access to the inside of the tank to put a nut on a return fitting!
Would Recommend
I would buy this product again
5.0
2 years ago
Sam
Fort Worth, tx
Verified
Used to add a return line for my EFI remod fuel tank. Easy to install, and Worked great.
I would buy this product again
5.0
2 years ago
Stovebolt
Dublin, Va.
Verified
Added fuel injection, needed to add a return line to the existing tank, the fitting worked great
Would Recommend
Worked great
5.0
2 years ago
Bob
San Benito texas
Verified
I used this for a return line on my father in laws 55 bel air and it worked perfectly. No issues
Would Recommend
Showing 9 of 9 reviews
Questions & Answers
1 Question • 1 Answer
Questions & Answers
1 Question • 1 Answer
Can i use this fitting on original plastic gas tank?
by Jason
• 3 months ago
1 answer
View Answer
1 of 1 questions shown