|
#91696059
Bolt-On Front/Rear Brake Kit for Ford Spindle W/ Wilwood Calipers
- Specifically designed for our Ford-style spindles and 9 Inch Ford rear-end
- Each kit includes new rotors (available with 5 on 4.5" bolt pattern), remanufactured GM metric calipers, caliper brackets, brake pads, bearings, seals and hardware
- Rear kit bolts on new-style big ford ends
$1,061.99
/kit
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Front and Rear Position, 11 Inch Rotor Diameter
- Specifically designed for our Ford-style spindles and 9 Inch Ford rear-end
- Each kit includes new rotors (available with 5 on 4.5" bolt pattern), remanufactured GM metric calipers, caliper brackets, brake pads, bearings, seals and hardware
- Rear kit bolts on new-style big ford ends
- All in one kit makes install a breeze
- Features 1/2-20 wheel studs
Comes as a Kit
View Kit Components
Key Specs
| MFG. Part # | 7154040 |
| Position | Front and Rear |
| Wheel Bolt Pattern (in.) | 5x4.5 in. | 5x4.75 in. |
| Wheel Bolt Pattern (mm) | 5x114.3 mm | 5x120.65 mm |
| Rotor Diameter | 11 Inch |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 7154040 Details
Speedway Motors 7154040 Details
Complete the front and rear suspension assembly on your T roadster chassis with a bolt-on brake kit specifically designed for our '37-'41 Ford style spindles and 9" Ford rear end. Each kit includes all necessary components: new rotors (available with 5-on-4.5" or 5-on-4.75" bolt pattern), D154 2 Piston 7/16" Inlet Wilwood Calipers, caliper brackets, brake pads, bearings, seals and hardware. Rear kit bots on new-style Big Ford ends.
Features
Installation note:
The inside diameter of this rotor will accept an axle flange that has a diameter of 6-1/4" or smaller. If your axle flange exceeds 6-1/4" in diameter, you will need machine your axle flange to decrease your axle flange diameter to fit this rotor as necessary.
When utilizing an aftermarket axle with disc brake conversion kits, it may be necessary to reduce the diameter of the axle flange to a diameter necessary to adequately fit inside the required Clearance I.D. that the brake hat/brake rotor will require. (see above diagram for illustration)
Specs
The caliper piston pin needs to be aligned with the notch in the pad to avoid fitment issues.
Guides & Documents
Speedway Motors 7154040 Specifications
Speedway Motors 7154040 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 7154040 |
| Brand | Speedway Motors |
| Position | Front and Rear |
| Wheel Bolt Pattern (in.) | 5x4.5 in. | 5x4.75 in. |
| Wheel Bolt Pattern (mm) | 5x114.3 mm | 5x120.65 mm |
| Rotor Diameter | 11 Inch |
| Rotor Type | Vented |
| Caliper Pistons | Two |
| Caliper Finish | Powder Coated |
| Parking Brake Provision | Yes |
| Minimum Recommended Wheel Diameter | 15 Inch |
| Rotor Shape | Round |
| Hardware Included | Yes |
| Rotor Style | Drilled |
| Front Rotor Included | Yes |
| Front Rotor Diameter | 11 Inch |
| Front Caliper Included | Yes |
| Rear Caliper Included | Yes |
| Front Spindles Included | No |
| Master Cylinder Included | No |
| Brake Booster Included | No |
| Brake Hoses Included | No |
| Rear Rotor Included | Yes |
| Bolt Pattern | 5 on 4.5" |
| Front Caliper Piston Quantity | Two |
| Front Caliper Finish | Powder Coated |
| GENERAL | |
| Sold in Quantity | Kit |
| Notes | Includes rotors, rotor adapters, calipers, bearings and seals, hardware, caliper brackets, brake pads, and brake line adapters. |
| Rotor Thickness | 1" |
| Stud Diameter | 0.5" |
| Stud Length | 1.5" |
| Thread Pitch | 1/2"-20 |
| Rotor Material Type | Cast Iron |
| Front Caliper Material | Aluminum |
| Caliper Material Type | Aluminum |
| Rear Rotor Diameter | 11.25" |
Ratings & Reviews
Ratings & Reviews
Questions & Answers
Questions & Answers
Be the first to ask a question.