BluePrint 302 Ford Hot Rod Crate Engine Kit, Edelbrock 1406

BluePrint 302 Ford Hot Rod crate Engine

Need a new engine for your Blue Oval ride? This Speedway exclusive crate motor will work great in your street rod or classic pickup truck. Machined and assembled at BluePrint Engines, each engine is dyno tested and includes the dyno sheet. Has a 30 month/50,000 mile manufacturer's warranty.

• 300+ Horsepower at 5300
• 320+ ft lbs at 3800
• Hand picked .040" over seasoned 1986-1995 block
• Squared and parallel decked
• Align honed main bearing bore
• Cylinders computer honed to within .0002"
• Cylinders sonic tested
• Brass freeze plugs
• 9.6-1 compression ratio
• Premium cast 2MAE crankshaft - ground 10/10
• Balanced rotating assembly
• Harmonic balancer
• Melling hi-volume oil pump
• Chrome front sump oil pan
• Hyd. Roller camshaft .543 int./.554 exh. lift, 218 int./226 exh. duration at .050, 112° lobe separation
• H.D. double roller timing chain
• Timing cover w/ dipstick hole
• Modified Ford E7TE cast iron heads
• 1.94" swirl polished intake valves
• 1.60" swirl polished exhaust valves
• Hardened retainers and springs
• Hardened pushrods
• Aluminum valve covers and breathers
• Polished aluminum dual plane 4bbl intake manifold
• Distributor installed and timing set
• Automatic transmission 157 tooth flexplate included (not installed)

Learn more about these crate engines by reading our article, "Building a Better SBF" as featured in Custom Classic Trucks Magazine.

Truck Freight Shipping Charges Apply - click here for details

Edelbrock 1406 Performer 600 CFM 4 Barrel Carburetor, Electric Choke

Edelbrock Performer Series 4 barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance carb to top off your hot rod, this Edelbrock carb is the best choice for performance and value. All Edelbrock products are proudly made in the U.S.A.

CALIBRATED FOR FUEL ECONOMY
Designed for small-block and small displacement big-block engines, this four barrel carb is recommended only for stock to Performer level applications. They are not recommended for use on RPM or Torker II intake manifolds. Match with an Edelbrock Performer or Performer EPS manifold and other brands of similar design. Calibrated 2% leaner than #1405. Includes both timed and full vacuum ports for ignition advance. Comes with: Metering Jets Primary .098, Secondary .095; Metering Rods .075 x .047; Step-Up Spring yellow (4" Hg). Includes an electric choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately. 

• Easy to tune with great driveability
• 600 CFM
• Electric choke
• Ford/Mopar arms sold separately

Moroso Spark Plug Wires, HEI Cap

If you have ever tried to put plug wires together yourself, you know how frustrating it can be. These pre-assembled Moroso 8mm spiral core wires are fiberglass reinforced with a silicone outer layer. Wires have 90° boots on both ends. Available in red or black for small block Chevy.

Plug Wire Lengths Included:

• 37-7/8" x 1
• 37"       x 2
• 35-1/2" x 1
• 33"       x 1
• 29-5/5" x 1
• 27-3/4" x 2

GM HEI Distributor Wiring Pigtail Connector

This wiring pigtail features a dual HEI connector that helps clean up your engine bay by eliminating the use of single spade connectors to make battery and tachometer connections. 10 inch long wires that are red and green to identify battery and tachometer.

 

• 10-inch length
• Red and green wires to identify battery and tach leads

Crate Engine Installation Guide (PDF)

Edelbrock 600 CFM 4 Barrel Carburetor Installation Instructions(PDF)