Bills Hot Rod Co. 200 Series LS Engine Alt/Power Steering Bracket
Chevy LS V8
The all-new redesigned Bills Hot Rod Co. 200 Series LS accessory brackets are the solution to all your LS accessory mounting troubles. A clean-sheet design, developed with the idea to provide a safe and reliable mounting solution for any LS swap configuration you may need for your build. Laser cut steel brackets with stainless steel hardware to hold up against even the harshest conditions. The Bills Hot Rod Co 200 Series brackets can be pieced together individually as needed, purchased as a complete accessory drive mounting solution and even used in tandem with other brackets as well.
Simple, clean bolt-on design, makes it easy for any DIY gearhead to navigate some of the most complex parts of an LS swap project. These brackets are built on the standard Corvette spacing, with the ability to fit F-Body (91668043) or Truck (91668044/91668045) spacing front drive systems with our additional spacer kits (sold separately).
It is as simple as picking what spacing is needed for your application and purchasing the appropriate spacer kit to go along with your brackets. Utilizes the existing factory threaded bolt holes on your cylinder heads and block, for a true "bolt-on" installation. The automatic belt tensioner assembly takes care of keeping your pulley system tight and operating smoothly - no manual adjustments to worry about after each spirited drive.
- Fits any Gen III/IV LS engine
- Laser cut steel brackets
- Stainless steel hardware
- True bolt-on installation
- Designed to work alongside existing OE and aftermarket brackets
- Multiple spacing options available for various GM accessories
- Available in raw, chrome, or black powder coated finish for a true custom look
Bills Hot Rod 200 Series LS Bracket systems are the ultimate fix to the mysteries of LS accessory routing and mounting - retain that custom look, without having to break the bank with a Bills Hot Rod Co. LS Mounting Solution.
This bracket kit has the same crankshaft pulley drive depth/offset as the Corvette (non-supercharged), CTS-V, and Pontiac G8 engines (which is 1-1/2" deep from the front of the pulley face to the crank bolt seat). Available spacer kits (sold separately) allow easy fitment to other GM drive depth/offsets. If using the Camaro/Firebird LS1 or Pontiac GTO depth/offset (2-1/4" deep), you'll need additional spacer kit 916-68043. If using the 2010-Up Camaro (non-supercharged) or GM truck depth/offest (3" deep), you'll need additional spacer kit 916-68044 for the alternator and power steering.
Required Parts for Installation:
42597151 - Holley 97-151 LS Idler Tensioner Assembly with Grooved Pulley - (GM # 12559325)(Dayco # 89337)
42597152 - Holley 97-152 Power Steering Pump Pulley, LS (GM # 12568997)
425198100 - Holley 198-100 Power Steering Aluminum Pump Assembly – (GM #26120639) or (GM # 25960709)
425197300 - Holley 197-300 Alternator with 105 Amp Capability - (GM # 10480326) or 425197301 - Holley 197-301 Alternator with 130 Amp Capability - (GM # 15754097)
Water pump - LS1/LS2/LS6 wide pulley water pump (GM # 19256263) or LS2 (GM # 89018052) or truck based water pump (GM # 19207665)
Additional Suggested Parts:
425198200 - Holley 198-200 Power Steering Reservoir Kit for LS Brackets - (GM # 15907878, 10317982, 26046502, 12555222)
6174839 - Gotta Show 131171 GM Power Steering Hose Kit - 1980-Up - (5/8"-18 or M16-1.5 banjo fitting required)
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
More Like This
1999-06 Vortec LS High Mount Alternator Bracket
1999-06 Vortec LS High Mount P/S and Alternator Mount Bracket
F-Body LS1 High Mount Alternator Relocation Bracket
Powermaster 861 LX2 Billet Alternator Bracket, Driver High Mount
Powermaster 860 LS1 Billet Alternator Bracket, Driver Low Mount
ICT Billet 551750-2 Alternator Bracket Kit, LS1 Camaro, Pass Side
ICT Billet 551512-2 Alternator Bracket, LS1 Camaro
Chrome Universal Alternator Bracket Arm
Billet Alternator Bracket for Big Block Chevy w/Short Water Pump
Mr Gasket 9853 Alternator Spacer, Universal, 4 x 7/16 Inch
Q & A
Pat talks about our red solid core spark plug wire and rajah ends.
Looking for an easy performance upgrade to your ignition system? MSD's line of Ignition Control Boxes offer extreme improvements to drivability and high rpm applications. Here's a look at the differences between the 6 series line-up.
Follow along as our Expert details his restoration methods for making an engine in an old 1954 Chevy look new again with a little cleaning and refinishing.
Kevin W. walks through each step of installing a new alternator bracket on a 454 Big Block Chevy.
These are the specifications for the alternator and A/C brackets from Bill's Hot Rod Company available at Speedway Motors.
Check out our one wire alternator conversion guide. We cover GM 1 wire alternator wiring as well as Ford and Chevy. Learn about pulley ratio and charging too!
Brief review of the different types of Ford alternators and regulators available through Speedway Motors.