|
#91015730
Billet Aluminum Fan Spacers
- This billet aluminum fan spacer allows you to properly position your fan for maximum air flow
- Comes with an adapter sleeve to work with 5/8" or 3/4" water pump pilot and 5/8" fan pilot size
- Dual bolt patterns accommodate center to center spacing of 1-3/4" to 2-5/32" and fits nearly all V8 engines
Starting from
$28.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
- This billet aluminum fan spacer allows you to properly position your fan for maximum air flow
- Comes with an adapter sleeve to work with 5/8" or 3/4" water pump pilot and 5/8" fan pilot size
- Dual bolt patterns accommodate center to center spacing of 1-3/4" to 2-5/32" and fits nearly all V8 engines
- Comes complete with hardware to simplify installation
- Available in 1", 1-1/2", 2", 2-1/2" and 3" lengths
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyDetails
Details
Precision machined billet aluminum. Includes bushing to fit both large (3/4") and small (5/8") pilot shaft Chevy water pumps. Five sizes available: 1", 1-1/2", 2", 2-1/2" and 3".
- Bolts included
- Lightweight billet 6061-T6 aluminum construction
- Anodized black
Note: This adapter contains two bolt patterns for both the long style and short style Chevy water pumps: 2-5/32" and 1-3/4".
Specifications
Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | Select Length to see |
| Brand | Speedway Motors |
| GENERAL | |
| Overall Diameter | 2.75" |
| Thickness | Select Length to see |
| Material Type | Aluminum |
| Finish | Anodized |
| Color | Black |
| Hardware Included | Yes |
| Sold in Quantity | Each |
| Notes | Select Length to see |
Ratings & Reviews
4.8
71 Reviews
The product is highly recommended by customers for its excellent fit and practicality, featuring good hardware and sturdy material that makes it a perfect solution for various fan and spacer needs. The users commend its quality, nice look and usability, emphasizing its durability and easy installation. It has been found very effective in solving overheating issues, with different sizes available for specific applications. Customers also noted that it helped get proper air flow through radiators and found it a perfect solution for different applications. Some customers had to make minor adjustments for optimal fitment. Customers also praised the product for adding aesthetic value to their engine builds, but few reported having to purchase additional bolts for the perfect fit. Overall, the product was described as high quality, practical, and reliable.
Ratings & Reviews
4.8
71 Reviews
The product is highly recommended by customers for its excellent fit and practicality, featuring good hardware and sturdy material that makes it a perfect solution for various fan and spacer needs. The users commend its quality, nice look and usability, emphasizing its durability and easy installation. It has been found very effective in solving overheating issues, with different sizes available for specific applications. Customers also noted that it helped get proper air flow through radiators and found it a perfect solution for different applications. Some customers had to make minor adjustments for optimal fitment. Customers also praised the product for adding aesthetic value to their engine builds, but few reported having to purchase additional bolts for the perfect fit. Overall, the product was described as high quality, practical, and reliable.
4.8
71 reviews
5
61
4
7
3
2
2
0
1
1
Most Liked Positive Review
4.0
Very nice part, buy bolts though
I'm using this on a street stock Camaro, with a Speedway aluminum water pump, Speedway aluminum pulleys, and Speedway 19" steel fan. It's a very beefy looking piece, way stronger than the cheaper extruded fan spacers. The shaft on the water pump sticks out very far, but I did not have to bore out the spacer any further due to the fact that I have a spacer beneath the pulley, and the pulley is very thick. If you were using a steel pulley with no spacer, you might have to drill the hole deeper as the other reviewer said. Have to take one star off for the bolts that came with it though. They look halfway decent, are grade 5, and they're supposed to be 5/16-24 but they would not thread into the water pump hub. I tried to clean them up by threading a good quality die over them, but it just ripped half the threads off. I pitched them and went to the local hardware store for some grade 8 bolts that were perfect.
Most Liked Negative Review
1.0
Pulley showed up dented
Bought this alternator for my street stock to use on dirt. When it showed up, the packaging was fine, bu the alternator pulley was dented as was the mounting bracket. Someone at Speedway obviously dropped it and then went ahead and put it in the box and shipped it to me. I called on Thursday about it and they said that they'd overnight me a new pulley so I could get it up and running for Saturday's race. I took Friday off waiting for it. It never showed. It finally showed up on Tuesday. I haven't had a chance to race with it yet.
Filter by Ratings
I would buy again
5.0
3 months ago
Rat rod
Omaha ne
Verified
Great quality works perfect
Would Recommend
Billet aluminum fan spacer 👍
5.0
3 months ago
Rm1
Memphis tn
Verified
Perfect fit
Would Recommend
i would buy again
5.0
9 months ago
sam
ind.
Verified
product worked as described
Would Recommend
I would buy this again
5.0
a year ago
Hank
Surprise, AZ
Verified
Fit great with my new fan shroud. Very well made and exactly what i needed.
Would Recommend
High quality
5.0
a year ago
Steve
Fl
Verified
Well made fits perfect
Would Recommend
I would buy this again
5.0
a year ago
Hank
Surprise, AZ
Verified
Well made and fit perfectly
Would Recommend
I would buy this again
5.0
a year ago
Hank
Surprise, AZ
Verified
Very well made. Worked on my SBC build
Would Recommend
yes
4.0
2 years ago
RogerDodger
Fla.
Verified
it did the job. Good quality
Would Recommend
Great and well built fan spacer
5.0
2 years ago
Fireball3553
Dubuque, Iowa
Verified
This fan spacer is made of light aluminum but well built.
Would Recommend
Great quality and well made.
5.0
2 years ago
C3
Berrien Springs, Mi
Verified
Purchased this product to space fan. The fit and finish are superb. Thanks speedway for a great product.
Would Recommend
Showing 10 of 71 reviews
Questions & Answers
9 Questions • 11 Answers
Questions & Answers
9 Questions • 11 Answers
Does this come in a 1/2" thick and coarse thread for 58 Chrysler hemi
by peter
• 7 years ago
1 answer
View Answer
How long is the pilot.
by Carl
• 9 years ago
1 answer
View Answer
is it possible to stack the spacers if you need to move it closer to the radiator.the engine in my stock car is set way back and there is a lot of space between the fan and radiator.any suggestions would be helpful,thank you.
by tommy
• 9 years ago
1 answer
View Answer
What size is the fan pilot pin?
by Brad56g
• 9 years ago
1 answer
View Answer
Do I need to take the water pump pulley off to install this spacer?
by Steve
• 11 years ago
1 answer
View Answer
Will this fan spacer fit my 1967 330 Olds
by Jim
• 11 years ago
1 answer
View Answer
Will this spacer fit 1966 Pontiac 389 water pump
by Todd Elmer
• 11 years ago
1 answer
View Answer
Hello from Virgin, Utah Will this fit SBF 351C {small block Ford}
by JB
• 11 years ago
1 answer
View Answer
will this adaptor bolt up to a waterpump with a 2 1/2" bolt pattern and a 3/4" pilot shaft
by
• 15 years ago
3 answers
View Answers
9 of 9 questions shown