|
#82461040
$596.99
/each
On Backorder
This part is Backordered. We currently do not have an estimate when this item will ship.
Quantity
Need Help? Call to Order
Add to a list
Select an engine to verify Fitment
Select Engine
Single Plane Intake Manifold Type, Aluminum, Natural
| MFG. Part # | 061040 |
| Intake Manifold Type | Single Plane |
| Carburetor Flange Type | 4-Barrel Square Bore |
| RPM Range | 2,500-7,000 |
| Material Type | Aluminum |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyWhile most manufacturers of small block Chevy intake manifolds have designed their units around 350 c.i. engines, Bill Mitchell Products has developed a very efficient manifold for 383 c.i. & larger engines BMP intake manifolds on average show gains of 10+ HP over the competition.
In addition to out-powering the competition, it's important to note that these single plane manifolds are designed to operate most efficiently in the 2500 to 7500 RPM range, and have the low-end throttle response and torque comparable to a dual plane. Look inside the plenum and you'll see a "turtle" on the manifold floor that helps increase velocity for improved bottom-end performance.
Holley 4150 carb flange.
Specs
For race/ off road use only
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 061040 |
| Brand | Bill Mitchell |
| Intake Manifold Type | Single Plane |
| Carburetor Flange Type | 4-Barrel Square Bore |
| RPM Range | 2,500-7,000 |
| Material Type | Aluminum |
| GENERAL | |
| Carburetor Quantity | One |
| Finish | Natural |
| Port Height | 2" |
| Port Width | 1.18" |
| Bolt Hole Pattern | 5.160" x 5.625" |
| Sold in Quantity | Each |
| Notes | Works with Fel Pro intake gasket #1205, if any porting is done works with #1206. |
3.9
7 Reviews
Customers highly praise the quality, perfectly matching the runners to world S/R torquer heads, and the easy-to-fit design of the product. Minor customers mentioned a need for minor port shaping, indicating excellent compatibility. The customers' positive experience with the product's overall design also highlights its superiority compared to others. Moreover, the product's aesthetic appeal is well-regarded, securing it as a fantastic fit for racing needs. Therefore, the product signifies an impressive addition to your racing gear based on its confirmed quality and performance.
3.9
7 reviews
5
4
4
1
3
0
2
1
1
1
Filter by Ratings
Casting quality not great
2.0
a year ago
North
Erie, PA
Verified
The quality of the casting and visual appearance are sub par.
Would Not Recommend
No
1.0
7 years ago
Mike
Indiana
Verified
Ports are really small , I'm afraid to use it, it would be like running a restrictor plate.
Would Not Recommend
Great Quality
4.0
7 years ago
Ray
Marinette Wi
Verified
Like the fact that the runners are a good match to my world S/R torquer heads,The fact they have a turtle casted in the floor. I believe this will be a good fit for my racing needs.
Would Recommend
Very nice product
5.0
8 years ago
502 Daddy
Trooper Pa...
Verified
Perfect intake looks great..
Would Recommend
Better than expected
5.0
9 years ago
Banana Boat
Brooksville, Florida
Verified
The quality is great. Perfect fit. Very minor port shaping was needed unlike other intakes.
Would Recommend
World SBC chevy 383 motown single plane intake manifold
5.0
11 years ago
Daveo
Gorokon NSW Australia
Verified
Hello evey one at there . Ok ive buy a world SBC chevy 383 motown single plane intake manifold , the intake manifold going on a 421 stroker 650 plus HP with nitrous in a 1970 C10 puckup , im goer have fun . The manifold looks great , it don,t look cheep , very well designed item thank you . but some one at speedway could not wait for the review and told me that i had time to install the item and tested the item and do the review , well engine still in the shop getting build so no dyno testing yet to see if the item works . But i bet it well work great , im happy , car,t wait to start testing .Go and buy one you be happy , Thank you and keep the throttle flat .
Would Recommend
Super fast delivery. Very please A++++++
5.0
14 years ago
Kyle
Valley Head, Al
Verified
Racing Engine
Would Recommend
Showing 7 of 7 reviews
3 Questions • 3 Answers
On a vortex 350, how do I need to run the coolant piping?
by Newto it
• 8 years ago
1 answer
View Answer
does this work for a imca stock car engine with 500 carb
by i man
• 10 years ago
1 answer
View Answer
What felpro gaskets fit this manifold, 1206 ?
by
• 14 years ago
1 answer
View Answer
3 of 3 questions shown
