The HD-9AE alignment lift features adjustable multi-position leveling, integrated front radius plates and rear slip plates. This makes it compatible with all leading alignment instrumentation, including 3D and camera wheel alignment systems.

Every BendPak alignment lift offers the same quality, warranty and built-in safety features as every other car lift we make. Wheel service is where many shops make the big bucks, so we’re conscious of the fact that these lifts need to be dependable and efficient to keep you satisfied. The high capacity on this alignment lift is also great for light-duty trucks and SUVs.

Features

Capacity

Lifting Capacity* 9,000 lbs. (4,082 kg)

*Max Capacity / Front Axle 4,500 lbs. (2,041 kg)

*Max Capacity / Rear Axle 4,500 lbs. (2,041 kg)

Rise

A - Min. Runway Height: 6.5" (165 mm)

B - Max. Rise: 70" (1,778 mm)

C - Max. Lifting Height: 76.5" (1,943 mm)

Time to Full Rise: 60 seconds

Outside Dimensions

D - Overall Width: 127" (3,226 mm)

E - Outside Length: 198" (5,029 mm)

F - Overall Length: 224" (5,690 mm)

G - Height of Columns: 88" (2,235 mm)

Inside Dimensions

H - Width Between Columns: 177" (4,496 mm)

I - Drive-Thru Clearance: 103.5" (2,629 mm)

Runways

J - Runway Width: 19" (483 mm)

K - Length of Runways: 188" (4,775 mm)

L - Width Between Runways: 40" (1,016 mm)

Alignment

M - Min. 4-Wheel Alignment: 71" (1,803 mm)

N - Max. 4-Wheel Alignment: 145" (3,683 mm)

O - Max. 2-Wheel Alignment: 160" (4,064 mm)

Minimum Wheelbase

Rated Capacity: 135" (3,429 mm)

75% Capacity: 115" (2,921 mm)

50% Capacity: 95" (2,413 mm)

25% Capacity: 80" (2,032 mm)

Locking

Locking Positions: 12

Lock Spacing: 4

Power Unit

Motor: 220 VAC / 60 Hz / 1 Ph

Noise: 45 dB

Due to the shipping weight and dimensions of this item, it is required that it be shipped to a business address that will have either a receiving dock or fork lift at the delivery destination to allow for the item to be unloaded from the truck/trailer at the time of delivery.

Charts

BendPak Delivery Requirements (PDF)

BendPak Delivery Information (PDF)

Specs

9,000-lb. maximum lifting capacity
CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
Multi-caster slip plates
Dual radius plate positions
Heavy-duty stainless steel lifting cables
Dual-hub cable sheaves
Grease nipples on every sheave and sheave axle
Single hydraulic cylinder
Integrated hydraulic flow restrictor
Durable powder-coat finish
Spring-loaded safety locks
Simple push-button lock release
Aircraft-quality stainless steel and aluminum pneumatic cylinders
Secondary lock system
Fully enclosed cables, airlines, safety latches and sheaves
Multiple adjustable height locking positions
Maintenance-free power system
Easy-to-reach operator controls
Non-skid runways

Guides & Documents

Technical Information (BendPak)

Warranty Information

BendPak Limited Warranty (PDF)

CA Prop 65

BendPak 5175820 Specifications

KEY SPECS
MFG. Part #	5175820
Brand	BendPak
Lifting Capacity	9,000 lbs.
Overall Height	88.00"

GENERAL
GTIN Code	00849672001409
Sold in Quantity	Each
Rise	70.00"
Motor	220 VAC / 60 Hz. / 1 Ph
Time to Full Raise	60.00 seconds
Overall Width	127.00"
Overall Length	224.00"
Outside Length	198.00"
Height of Columns	88.00"
Length of Runways	188.00"
Runway Min Height	6.50"
Runway Width	19.00"
Width Between Runways	40.00"
Max Lifting Height	76.50"
Width Between Posts	117.00"
Min. Wheelbase (25% Capacity)	80.00"
Min. Wheelbase (50% Capacity)	95.00"
Min. Wheelbase (75% Capacity)	115.00"
Min. Wheelbase (Rated Capacity)	135.00"
Locking Positions	12
Lock Spacing	4.00"

Ratings & Reviews

Be the first to write a review.

Questions & Answers

Be the first to ask a question.