Baer Brakes 3301012 Tracker Adjustable Tie Rod Ends F-Body

The Baer “Tracker” adjustable tie-rods feature 6061 T-6 aluminum, fully machined sleeve with a black anodized finish, a Teflon lined 5/8” heim joint and 4140 steel pin which. The pin is machined with the correct taper so no modification to the OE spindles is required and then heat treated. The Trackers Tie Rods are vehicle specific, mounting to the OE inner tie rod and offer approximately .875” of adjustment at the spindle to help correct bump steer issues due to modified suspensions and/or poor OE design. Best of all these are made in the USA!

There are 2 Factory Tie Rods on the 1975 Firebird. This Tracker is for early design with an OE outer end measuring 5.750" from the center of the bowl to the end of the tie rod.

Tracker tie rod set Front 1970-1974 GM F-Body All

Tracker tie rod set Front 1975-1975 GM Firebird All Notes 1st design 5.75 inch eye of ball to end of sleeve

Formed as Baer, Inc. (Baer Brake Systems) in 1994, founder Hal Baer established the company from a racing background in the Corvette and World Challenge Series by identifying a gap in offerings for his own race cars. By using popular (at the time) PBR and Alcon calipers, he adapted and built complete systems (hose and fittings, etc.) for many popular domestic muscle cars.

Today, in their 70,000sq ft facility in Phoenix, Arizona, Baer Brakes continues to be a leader in the performance brake industry by focusing on engineering design and innovative technology to deliver the most complete and detail-oriented brake solutions to their customers.

Through their early relationships with high-profile OE prototype manufacturers and builders (such as Chrysler, General Motors, Roush, Shelby, Foose, Mark Steilow, Big Red, etc.), Baer became known as the premier domestic brake company which would later translate to being the face of the 'Pro-Touring' market segment. In the early 2000’s, Baer produced their first in-house caliper, the forged Monoblock 6S, which was soon followed by the extruded and machined 2-pc, 6P caliper. By doing this, it greatly reduced Baer's outside caliper dependencies and allowed them to focus even more on developing and manufacturing other components as well and transition from a systems integrator to full brake system builder. Baer Brakes was the official brake of the Overhaulin' TV show and in 2007, Baer was recognized by Hot Rod Magazine as "One of Twenty Companies that Changed the World and today they remain the brake system of choice for many top builders such as Roadster Shop, Ring Brothers, Goolsby Customs, etc., just to name a few. Bear’s success caught the attention of Holley Performance Brands and in 2021, Baer was acquired by them, solidifying Baer’s continued growth as an innovative leader in their space.