|
#36980023
$409.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
| Camshaft Type | Hydraulic Roller |
| RPM Range | 4000-7000 |
| Intake Duration (.050" Lift) | Select Model |
| Exhaust Duration (.050" Lift) | Select Model |
| Lobe Separation | Select Model |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyDeveloped in house, we went back to the drawing board in search of more power and torque, even with the use of less intake duration. These new BTR lobe designs were Spintron tested to help achieve the highest overall power curve while also maintaining strict valvetrain stability and durability standards.
Stage 1
217/22X .616"/.616" 113 LSA
Good for 5.3s and 6.0s with cathedral port heads and factory or aftermarket long runner intakes, it also gives great results in LS3 headed applications as well. At the end of the day, if you're hanging a smaller 62-75mm turbo on your LS-based build ,and plan on putting some street miles on it, the Turbo Stage 1 is hard to beat.
Stage 2
220/23X .618"/.618" 113 LSA
The old Stage 2 had proven to be an excellent camshaft choice for cathedral port headed 5.3s and 6.0s utilizing a wide range of different turbos. Developed in house, we went back to the drawing board in search of more power and torque ,even with the use of less intake duration. These new BTR lobe designs were Spintron tested to help achieve the highest overall power curve while also maintaining strict valvetrain stability and durability standards. Whether you're putting together a budget street build with a small 7275 turbo or aiming for the fences with a Borg Warner S485, this camshaft will make sure the valve events are optimized for your pressurized application.
Stage 3
224/23X .618"/.618" 114 LSA
The new BTR Turbo Stage 3 V2 cam was designed to bridge the gap between street and strip applications . The old Stage 3 had proven to be an excellent camshaft choice for cathedral port headed 5.3s and 6.0s utilizing a wide range of different turbos. Developed in house, we went back to the drawing board in search of more power and torque ,even with the use of less intake duration. These new BTR lobe designs were Spintron tested to help achieve the highest overall power curve while also maintaining strict valvetrain stability and durability standards.
Do you have a lightweight setup with a powerglide + 5.3/6.0 that's being pressurized by an S400 (or similar size) turbocharger? If so, this cam will have you lighting the win lamps on race day.
Stage 4
227/24X .618"/.618" 115 LSA
The new BTR Turbo Stage 4 V2 cam was designed for use in serious effort stock stroke applications spinning over 8000rpm with supporting valvetrain components. For you folks who may have a ~408" bottom end spinning it in the 6400-6800rpm range, this new cam will also be a very good fit. Developed in house, we went back to the drawing board in search of more power and torque ,even with the use of less intake duration. These new BTR lobe designs were Spintron tested to help achieve the highest overall power curve while also maintaining strict valvetrain stability and durability standards.
Paired to an S400 frame (or similar size), this camshaft will help you move some serious air. Regarded as the BIG STICK of our turbo cam lineup, the Stage 4 is here to knock it out of the park.
For race/ off road use only
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | Select Model to see |
| Brand | BTR |
| Camshaft Type | Hydraulic Roller |
| RPM Range | 4000-7000 |
| Intake Duration (.050" Lift) | Select Model to see |
| Exhaust Duration (.050" Lift) | Select Model to see |
| Lobe Separation | Select Model to see |
| GENERAL | |
| Gear Attachment | 3-Bolt |
| Intake Valve Lift w/ Rocker Arm Ratio | .618" |
| Exhaust Valve Lift w/ Rocker Arm Ratio | .618" |
| Sold in Quantity | Each |
Be the first to ask a question.
