|
#9107956
$41.99
/pair
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 11.00" Overall Length, Steel, Natural
Comes as a Kit
View Kit Components
Need help?
855.313.9176Quick and Easy Returns
Return PolicyAuger style muffler fits 3-1/2" diameter pipe. 11" long. Baffle style. Slips inside.
| KEY SPECS | |
|---|---|
| MFG. Part # | 9107956 |
| Brand | Speedway Motors |
| GENERAL | |
| Overall Length | 11.00" |
| Inside Diameter | .83" |
| Material Type | Steel |
| Finish | Natural |
| Sold in Quantity | Pair |
4.8
13 Reviews
Customers find the muffler highly efficient at reducing exhaust noise while retaining some back pressure. It's appreciated for an easy fit and for working as it should. Users commend its practicality in hot rod projects with Its application having no noticeable power loss. The installation process is also praised, achievable in 10 minutes or less. Some users found variable fit sizes, but generally, the muffler fits accurately into place. In comparison to other brands, customers deem our product superior, having effectively silenced noise. Repeat purchases were indicated, cementing customer satisfaction.
4.8
13 reviews
5
11
4
1
3
1
2
0
1
0
Most Liked Positive Review
5.0
Worked great for my application
I used one auger directly in front of the muffler. (Flow master FX) On a 2011 Silverado 6.0 LS. Before installed it was very loud and obnoxious. After installing it has a rumble but it is much quieter than expected. I can't believe the difference. Definitely would recommend.
Most Liked Negative Review
3.0
They work, but my 3.5" did not fit as good as my 3"
I have a set of these in 3" on a street vehicle love them, it really cuts down the rasp and the noise. 5 stars on those. However I bought a set of 3.5" and there loose in my pipe. The 3" I hammered in and good tight fit, the 3.5" theres a even gap going across outside.
Filter by Ratings
Worked great for my application
5.0
6 months ago
Jerry
Buffalo NY
Verified
I used one auger directly in front of the muffler. (Flow master FX) On a 2011 Silverado 6.0 LS. Before installed it was very loud and obnoxious. After installing it has a rumble but it is much quieter than expected. I can't believe the difference. Definitely would recommend.
Would Recommend
Great insert and unbelievably quiet.
5.0
11 months ago
VJam
North America
I used one of these insert on my 3.5" exhaust. Amazingly quiet to the point where it's almost as quiet as OEM.
Would Recommend
I would buy this product again
5.0
2 years ago
Dude
ut.
Verified
I am using this product to make mufflers for my car.
Would Recommend
top quality
5.0
2 years ago
Red
Lake of the Ozarks, Mo.
Verified
installed at end of exhaust. Toned the sound down to just the tone I was looking for.
Would Recommend
Collector muffler
5.0
2 years ago
Dano
Lebanon Ohio
Verified
Tone down exhaust noise to an acceptable level and leave some thump, also adding some needed back pressure
Would Recommend
YES
5.0
3 years ago
GUNSMOKE
NEBRASKA
Verified
FIT LIKE THEY SHOULD
Would Recommend
Works great
4.0
4 years ago
Dsweld
Uprape ny
Verified
Working great
Would Recommend
I would buy this again
5.0
4 years ago
CW
Orillia Canada
Verified
I used a total of 8 spirals in each side pipe, on a hot rod project, 400 hp engine. Definitely helped quiet it down, probably not quite enough, with no noticeable power loss.
Would Recommend
Exceptional value for a product that works exceedingly well.
5.0
5 years ago
Rat Rod Royce
Nashville
Verified
Hammer the baffles in place in less than 10 minutes. I would've said 5, but I had to taper grind one of the baffles to fit a little easier. Even so, great product!
Would Recommend
Better than expected baffling on LakeStyle headers!
5.0
5 years ago
Royce
Nashville
Verified
Very easy and effective.
Would Recommend
Showing 10 of 13 reviews
Be the first to ask a question.
