|
#91658231
$31.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
0.375" Overall Thickness, 3.08" Inside Diameter
| MFG. Part # | 91658231 |
| Overall Thickness | 0.375" |
| Bolt Pattern | Multi: 5 on 5" | 4.75" | 4.50" |
| Material Type | Aluminum |
| Finish | Anodized |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyNote: 4-1/2" and 4-3/4" bolt patterns have 1/2" holes. 5" bolt pattern has 5/8" holes.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91658231 |
| Brand | Speedway Motors |
| Overall Thickness | 0.375" |
| Bolt Pattern | Multi: 5 on 5" | 4.75" | 4.50" |
| Material Type | Aluminum |
| Finish | Anodized |
| GENERAL | |
| Inside Diameter | 3.08" |
| Outside Diameter | 6.5" |
| Sold in Quantity | Each |
| Weight | 0.8 lbs. |
4.9
19 Reviews
Customers commend the product's performance, quality, and fitting. It stands out due to being an excellent wheel spacer, notably remedying high speed vibration issues in various vehicles. The 6 1/2" OD is sufficient to support steel wheel hubs, contributing to its superior functionality. Users report that it resolves wheel fitting problems excellently, moving the wheel away from the caliper, ensuring they missed inner frames. Customers appreciate the high-quality material that reinforces durability, precise tolerances, and usability. The product consistently works as described and fitting is reported as perfect, facilitating overall customer satisfaction. Notably, users are even willing to repurchase.
5
19 reviews
5
18
4
1
3
0
2
0
1
0
Filter by Ratings
would buy again
4.0
a month ago
Pat
AZ
Verified
Did the job. Steel would be better. Fit was good
Would Recommend
Very Satisfied
5.0
3 months ago
RudeMan
Coastal SC
Verified
Great fitment for ford 5 bolt. Seems machined well for a fairly inexpensive spacer. Slightly heavier that I thought it would be. But very satisfied.
Would Recommend
I would use this product again
5.0
a year ago
Jake
Sanford mi.
Verified
It fit fine and is nicely made product
Would Recommend
It's A Quality Part
5.0
a year ago
KS80537
Loveland, CO
Verified
We needed 3/8-inch spacers to clear brake calipers without inducing fender rub. Not 5/16, not 7/16 - it had to be 3/8. These spacers fit the 4.5-inch bolt circle of a 1966 Mustang perfectly. I like that they have holes instead of slots; there's no chance it can get out of position. It's on the pricey side, but hey, I was willing to pay it. Note that they are sold individually, not as a pair.
Would Recommend
Great purchase
5.0
a year ago
Lee
Minneapolis
Verified
Fit perfectly and lightweight.
Would Recommend
Yes
5.0
2 years ago
D
Bernice ok
Verified
Works as it should
Great service
5.0
2 years ago
TF
MN
Verified
Good customer service
Would Recommend
Great wheel spacer
5.0
3 years ago
TeamHD
Central Wisconsin
Verified
I had a set of 3/8" spacers on my Quick Performance 9" that I felt didn't support the entire US Wheel Smoothie. It's a basically stock stamped steel wheel. I purchased these because of their 6 1/2" OD that supplied enough surface area to support the entire hub of the steel wheel. It eliminated a high speed vibration. Great product!
Would Recommend
Great product
5.0
3 years ago
None
None
Verified
Perfect fit
Yes
5.0
3 years ago
Chuck
Texas
Verified
Worked as advertised
Would Recommend
Showing 10 of 19 reviews
Be the first to ask a question.
