Aluminum Hard Fuel Line/Tubing, 1/4 Inch O.D.
Universal Fit, Aluminum, Natural, -4 AN
Where else can you buy aluminum fuel line in the size and length you need? This easy-to-flare and bend tubing works great as AN hard line and will save weight and money.
- Use with tube nut couplers, sleeves and 37° flared AN fittings
- Rated to 250 psi
- Not recommended for high pressure (brake) applications
- Available in 10 ft. or 20 ft. coils
Learn more about flaring hard line and how to select proper automotive fittings by reading our tech article, The Principles of Automotive Fittings.
The main issue when dealing with aluminum tubing (or any aluminum for that matter) is that it “work hardens” when it flexes, which can lead to cracks. It is important that the hard line is isolated from vibration and movement.
Clamp the tubing securely with rubber coated clamps (Adel clamps) and use bulkhead fittings where the tubing attaches to the flex line. Never run the tubing directly to the engine without a flexible hose section. If installed properly, aluminum tubing is safe and durable.
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
More Like This
Aluminum Hard Fuel Line/Tubing, 3/8 Inch O.D.
Aluminum Hard Fuel Line/Tubing, 5/8 Inch O.D.
Aluminum Hard Fuel Line/Tubing, 1/2 Inch O.D.
5/8" Aluminum Fuel Line Kit, 10 ft
5/8" Aluminum Fuel Line Kit, 30 ft
3/8 Inch Aluminum Fuel Line Kit, -6 AN Female Adapters
3/8 Inch Aluminum Fuel Line Kit, -6 AN Male Adapters
1/2 Inch Aluminum Fuel Line Kit, -8 AN Female Adapters
1/2 Inch Aluminum Fuel Line Kit, -8 AN Male Adapters
Red See-Through Fuel Line Hose, 3/8 Inch I.D. x 6 Ft.
Q & A
Check out episode 9 of our 410 Sprint Car Build series! Today, the guys are having some fun with the fuel system.
Learn how to replace a fuel sending unit. Our fuel gauge sending unit guide and installation video covers all you need to match your fuel sender and gauge.
Pat talks about our Tanks Inc. EFI fuel tanks.
Speedway Motors employee Pat O. takes some time to discuss the Fuel Gauge Interface Module that allows you to use any gauge set with almost any fuel level sending unit.
Thinking about rebuilding your fuel system but you're not sure what it entails? Click here for a comprehensive article on what to expect!
Learn about Dual Carb Linkage Setup. Follow along as an expert works through his fuel and throttle setup including part mounting and some modifications.
Learn how-to plumb your dual feed Holley Carburetor.