Aluminum Folding Work Table, 35 X 18 Inches

• Nearly six square feet of work surface that supports up to 50 lbs.
• Upturned 360-degree lip to prevent losing parts or fasteners
• Quarter turn spring loaded locks secure work table in vertical position
• Crafted from .090-inch 3003 H14 aluminum sheet
• Attaches via four slotted 1/4-inch mounting holes (fasteners not included)
• Can be used inside enclosed trailers, garage, or shop walls, etc.
• Built in tool storage holes/slots to hold tools while using the table
• 18-inch deep table only takes up 4-inches of depth when stored

A Fold Up Work Table That Can Handle Your Shop or Track Side Repair Needs

Having a clean and stable work surface is critical to ensuring your mechanical repairs, service, or maintenance needs are completed without losing small parts. There’s nothing worse than using the upper radiator channel or the inner fender to store small parts or tools during an impromptu carb jet change, spark plug installation, or other work. Especially track side in your enclosed car trailer where space is at a premium to begin with.

Our fold up work table takes up only four inches of depth when stowed in the upright position and is secured with spring loaded twist locks on both ends. The .090-inch thick aluminum fold up table can support up to 50 pound loads and features an upturned lip to prevent the loss of small parts that are known to roll around. The upper portion of the enclosed trailer workbench features a mounting surface with tool storage via several holes/slots of assorted sizes for your pliers, screwdrivers, and other tools. This folding work station attaches to your trailer or shop wall via four slotted 1/4-inch holes. This means if you wish, you can install a second set of mounting fasteners elsewhere in your shop (or perhaps on the exterior of your trailer) to allow you to simply move the folding work station to another location as needed.

See our full line of trailer organizer products at Speedway Motors to add to or compliment this fold up work table in your enclosed trailer!

Dimensions: 

• Overall Length: 35.31” 
• Overall Height Closed: 18“
• Overall Height Open: 10.23”
• Open Width/Depth: 18” 
• Closed Width/Depth: 4”
• Mount center to center: 32”