These 105° bend aluminum tubes allow you to build custom radiator/coolant hoses. Each tube features a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

Item Details

Outside Diameter

CA Prop 65

Specifications

KEY SPECS
MFG. Part #	Select Bend Angle and Size (o.d.) to see
Brand	Speedway Motors
Angle	105 degree
Material Type	Aluminum

GENERAL
Outside Diameter	1.75"
Finish	Natural
Sold in Quantity	Each
Notes	Select Bend Angle and Size (o.d.) to see
Hose End Size	Select Bend Angle and Size (o.d.) to see

Ratings & Reviews

4.7

15 Reviews

Overall Assessment

Customers acknowledge the product's superior quality, durability, and innovative design. It's praised for its performance, specifically in vacuuming resin pellets in demanding environments and in radiator hose applications in modified cars. The product's flexibility and adjustability are confirmed, providing solutions in high-stress scenarios and preventing hose splitting and collapsing. The aluminum material was appreciated for its heat shedding capability, while its heavier gauge made it particularly robust. The product is further characterized as an excellent problem solver, specifically concerning clearance issues in car modification. Several customers plan to repurchase and recommend it for its functionality and custom look. Despite minor shipping errors, the product satisfaction remains high.

Write A Review

4.7

15 reviews

Most Liked Positive Review

5.0

Will Purchase Again

This product is being used as a way to vacuum resign pellets out of a 1400 lbs. gaylord into a 600 ton press. The problem we were having was the hose that is used, has to sharp of bend in it which would cause it to split, releasing pellets out and onto the floor. This now allows me to have it come out of the gaylord with a longer radius and keeping the hose from such an extreme angle. I will be showing our other plants the set up to held them elevate the same issues.

Most Liked Negative Review

3.0

nice parts but wrong

the parts were ok but i ask for one 90 degree and one 105 degree and got two 90 degrees , one in aluminum and one in steel. so I am 50% satisfied.

Filter by Ratings

Sort Reviews

Nice solution

5.0

5 months ago

El Cerrito, CA

Verified

Excellent quality

Would Recommend

I would buy this again

5.0

5 months ago

CDM 156

Littleton, CO

Verified

Worked great for my LS Swap.

Would Recommend

I would buy this again

4.0

2 years ago

Rick

Kansas

Verified

Haven't used it yet , bought it just in case

Would Recommend

Will Purchase Again

5.0

5 years ago

Bswell3

Muscle Shoals Alabama

Verified

Would Recommend

Beautiful part.

5.0

6 years ago

Levi

Olathe, Kansas

Verified

This part was 100% as described and very high quality.

Would Recommend

Perfect Upper Radiator Hose for SBC in Early Ford

5.0

7 years ago

Cline

Indianapolis, IN

Verified

I used this pipe as a upper radiator hose for a SBC in a '32 Ford frame. You will still have to use two 'connecting' pieces of rubber at each end.

Would Recommend

Perfect mandrel bent aluminum tubing

5.0

8 years ago

GMYDOC

Verified

We use these tubes on all of our Corvette Resto-Mod LS engine installs. The tubes make a clean looking high flowing cooling system work even better. The aluminum tubing also helps shed heat.

Would Recommend

Nice connector.

4.0

9 years ago

Prescott, AZ

Verified

Heavier gauge than expected (nice!) and good beads.

Would Recommend

These hose connectors are a real problem solver.

5.0

9 years ago

Squeezers53

Nor Cal

Verified

These made it easy to clear the alt. relocation for my a/c install.

Would Recommend

custom look

5.0

11 years ago

rcnut

escondido,ca

Verified

for that custom look

Would Recommend

Load More Reviews

Showing 10 of 15 reviews

Questions & Answers

2 Questions • 2 Answers

Sort Questions

Wall thickness/gauge? Thanks, Eddie

by Eddie

• 6 years ago

1 answer

View Answer

What is the total length of this product?

• 14 years ago

1 answer

View Answer

2 of 2 questions shown